Re: [U-Boot] [PATCH 4/4] boards/km_arm: enable support for Macronix SPI NOR flash

[Stefan Roese]

On 25.11.19 17:24, Holger Brunck wrote:

The M25P80 and M25P32 SPI flashes from Numonix/Micron
will be replaced by Marconix MX25L80 and MX25L32 flashes.

Signed-off-by: Holger Brunck <holger.bru...@ch.abb.com>
CC: Stefan Roese <s...@denx.de>
CC: Valentin Longchamp <valentin.longch...@ch.abb.com>

Reviewed-by: Stefan Roese <s...@denx.de>

Thanks,
Stefan

---
  configs/km_kirkwood_128m16_defconfig | 1 +
  configs/km_kirkwood_defconfig        | 1 +
  configs/kmcoge5un_defconfig          | 1 +
  configs/kmnusa_defconfig             | 1 +
  4 files changed, 4 insertions(+)

diff --git a/configs/km_kirkwood_128m16_defconfig 
b/configs/km_kirkwood_128m16_defconfig
index 73b4054dcc..c05b789897 100644
--- a/configs/km_kirkwood_128m16_defconfig
+++ b/configs/km_kirkwood_128m16_defconfig
@@ -42,6 +42,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
  # CONFIG_MMC is not set
  CONFIG_SF_DEFAULT_SPEED=8100000
  CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MACRONIX=y
  CONFIG_MVGBE=y
  CONFIG_MII=y
  CONFIG_SYS_NS16550=y
diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig
index ea8af60fa5..a17cfdd92c 100644
--- a/configs/km_kirkwood_defconfig
+++ b/configs/km_kirkwood_defconfig
@@ -42,6 +42,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
  # CONFIG_MMC is not set
  CONFIG_SF_DEFAULT_SPEED=8100000
  CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MACRONIX=y
  CONFIG_MVGBE=y
  CONFIG_MII=y
  CONFIG_SYS_NS16550=y
diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig
index f2c835029a..a44df06e1b 100644
--- a/configs/kmcoge5un_defconfig
+++ b/configs/kmcoge5un_defconfig
@@ -46,6 +46,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
  # CONFIG_MMC is not set
  CONFIG_SF_DEFAULT_SPEED=8100000
  CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MACRONIX=y
  CONFIG_MVGBE=y
  CONFIG_MII=y
  CONFIG_SYS_NS16550=y
diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig
index 0b5a0e4e22..ffd8cb03f9 100644
--- a/configs/kmnusa_defconfig
+++ b/configs/kmnusa_defconfig
@@ -46,6 +46,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
  # CONFIG_MMC is not set
  CONFIG_SF_DEFAULT_SPEED=8100000
  CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MACRONIX=y
  CONFIG_MV88E6352_SWITCH=y
  CONFIG_MVGBE=y
  CONFIG_MII=y

Viele Grüße,
Stefan

--
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot