Hi Peng, On Tue, Dec 17, 2019 at 12:46 PM Fabio Estevam <feste...@gmail.com> wrote: > > Hi Peng, > > I am trying to boot the latest U-Boot mainline on a imx8qxp mek board > and this is what I get: > > U-Boot SPL 2020.01-rc5-00001-g3dd6a9300b-dirty (Dec 17 2019 - 12:33:57 -0300) > Normal Boot > WDT: Not found! > Trying to boot from MMC2_2 > Load image from MMC/SD 0x46800 > > U-Boot 2020.01-rc5-00001-g3dd6a9300b-dirty (Dec 17 2019 - 12:33:57 -0300) > > CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 31C > > Model: Freescale i.MX8QXP MEK > Board: iMX8QXP MEK > Build: SCFW 550f3079, SECO-FW d7523fe8, ATF f92d379 > Boot: SD1 > DRAM: 3 GiB > Failed to enable ipg clk > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > Loading Environment from MMC... *** Warning - bad CRC, using default > environment > > In: serial@5a060000 > Out: serial@5a060000 > Err: serial@5a060000 > Net: Failed to enable ipg clk > > Error: ethernet@5b040000 address not set. > > (It hangs here). > > I am using the SC and seco firmware from the 4.19.35 release. > > Here is the updated README that I am following: > http://code.bulix.org/i8bhp8-1018627 > > Any ideas as to how to fix this boot problem?
Did you have a chance to look at this boot regression? Thanks