> Subject: Re: [PATCH] imx: imx8qxp_mek: update README > > Hi Peng, > > On Wed, Jan 8, 2020 at 10:33 PM Peng Fan <[email protected]> wrote: > > > The ipg clk patch needs to be reverted for now. Anyway the log as below: > > Which commit are you referring to? Can you send a revert? Is this revert > needed for booting this board? > > > U-Boot SPL 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22 > > +0800) Normal Boot > > WDT: Not found! > > Trying to boot from MMC2_2 > > Load image from MMC/SD 0x46800 > > > > > > U-Boot 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22 +0800) > > I don't see edb89b239c in U-Boot mainline. > > Could you please make sure you use the latest U-Boot mainline in your test?
U-Boot SPL 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46800 U-Boot 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 20C Model: Freescale i.MX8QXP MEK Board: iMX8QXP MEK Build: SCFW 550f3079, SECO-FW d7523fe8, ATF f900faa Boot: SD1 DRAM: 3 GiB Failed to enable ipg clk MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: Failed to enable ipg clk Warning: ethernet@5b040000 using MAC address from ROM eth0: ethernet@5b040000 Hit any key to stop autoboot: 0 Rebased to tom's master branch. Regards, Peng. > > Thanks
