On 26/02/20 6:25 pm, Pratyush Yadav wrote:
> diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
> index 1ed4f0907b..94e99eb99f 100644
> --- a/drivers/mtd/spi/spi-nor-core.c
> +++ b/drivers/mtd/spi/spi-nor-core.c
> @@ -148,6 +148,32 @@ struct sfdp_header {
>  struct sfdp_bfpt {
>       u32     dwords[BFPT_DWORD_MAX];
>  };
> +
> +/**
> + * struct spi_nor_fixups - SPI NOR fixup hooks
> + * @default_init: called after default flash parameters init. Used to tweak
> + *                flash parameters when information provided by the 
> flash_info
> + *                table is incomplete or wrong.
> + * @post_bfpt: called after the BFPT table has been parsed
> + * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs
> + *             that do not support RDSFDP). Typically used to tweak various
> + *             parameters that could not be extracted by other means (i.e.
> + *             when information provided by the SFDP/flash_info tables are
> + *             incomplete or wrong).
> + *
> + * Those hooks can be used to tweak the SPI NOR configuration when the SFDP
> + * table is broken or not available.
> + */
> +struct spi_nor_fixups {
> +     void (*default_init)(struct spi_nor *nor);
> +     int (*post_bfpt)(struct spi_nor *nor,
> +                      const struct sfdp_parameter_header *bfpt_header,
> +                      const struct sfdp_bfpt *bfpt,
> +                      struct spi_nor_flash_parameter *params);
> +     void (*post_sfdp)(struct spi_nor *nor,
> +                       struct spi_nor_flash_parameter *params);
> +};
> +
>  #endif /* SPI_FLASH_SFDP_SUPPORT */
>  
>  static int spi_nor_read_write_reg(struct spi_nor *nor, struct spi_mem_op
> @@ -1743,6 +1769,19 @@ static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] 
> = {
>  
>  static int spi_nor_hwcaps_read2cmd(u32 hwcaps);
>  
> +static int
> +spi_nor_post_bfpt_fixups(struct spi_nor *nor,
> +                      const struct sfdp_parameter_header *bfpt_header,
> +                      const struct sfdp_bfpt *bfpt,
> +                      struct spi_nor_flash_parameter *params)
> +{
> +     if (nor->info->fixups && nor->info->fixups->post_bfpt)
> +             return nor->info->fixups->post_bfpt(nor, bfpt_header, bfpt,
> +                                                 params);
> +
> +     return 0;
> +}
> +
>  /**
>   * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table.
>   * @nor:             pointer to a 'struct spi_nor'
> @@ -1914,7 +1953,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
>               return -EINVAL;
>       }
>  
> -     return 0;
> +     return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
>  }
>  
>  /**
> @@ -2074,6 +2113,29 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
>  }
>  #endif /* SPI_FLASH_SFDP_SUPPORT */
>  
> +/**
> + * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
> + * after SFDP has been parsed (is also called for SPI NORs that do not
> + * support RDSFDP).
> + * @nor:     pointer to a 'struct spi_nor'
> + *
> + * Typically used to tweak various parameters that could not be extracted by
> + * other means (i.e. when information provided by the SFDP/flash_info tables
> + * are incomplete or wrong).
> + */
> +static void spi_nor_post_sfdp_fixups(struct spi_nor *nor,
> +                                  struct spi_nor_flash_parameter *params)
> +{
> +     if (nor->info->fixups && nor->info->fixups->post_sfdp)
> +             nor->info->fixups->post_sfdp(nor, params);
> +}
> +

This would cause build failure as spi_nor_fixups is only available when 
SFDP support is enabled:

drivers/mtd/spi/spi-nor-core.c: In function ‘spi_nor_post_sfdp_fixups’:
drivers/mtd/spi/spi-nor-core.c:2280:44: error: dereferencing pointer to 
incomplete type ‘const struct spi_nor_fixups’
 2280 |  if (nor->info->fixups && nor->info->fixups->post_sfdp)

May be move all definitions of out the #ifdef

Regards
Vignesh 

Reply via email to