Hi Jagan, >-----Original Message----- >From: Jagan Teki <[email protected]> >Sent: 02 April 2020 14:42 >To: Pragnesh Patel <[email protected]> >Cc: U-Boot-Denx <[email protected]>; Atish Patra ><[email protected]>; [email protected]; Bin Meng ><[email protected]>; Paul Walmsley <[email protected]>; Troy >Benjegerdes <[email protected]>; Anup Patel ><[email protected]>; Sagar Kadam <[email protected]>; Rick Chen ><[email protected]> >Subject: Re: [PATCH v6 00/17] RISC-V SiFive FU540 support SPL > >[External Email] Do not click links or attachments unless you recognize the >sender and know the content is safe > >On Sun, Mar 29, 2020 at 10:36 PM Pragnesh Patel ><[email protected]> wrote: >> >> This series add support for SPL to FU540.U-Boot SPL can boot from >> L2 LIM (0x0800_0000) and jump to OpenSBI(FW_DYNAMIC firmware) and >> U-Boot proper from MMC devices. >> >> How to test this patch: >> 1) Go to OpenSBI-dir : make PLATFORM=sifive/fu540 O=build_dir >> I=install_dir FW_DYNAMIC=y install >> 2) cp install_dir/platform/sifive/fu540/firmware/fw_dynamic.bin >> <u-boot-dir>/ > >I think setting >OPENSBI=<path/to/opensbi/install_dir/platform/sifive/fu540/firmware/fw_d >ynamic.bin> >would help to attach the opensbi instead of copying into the source directory. >Would you please check that.
Yes that will also work, if I need to submit v7 then will update this. > >Jagan.
