On Thu, Apr 2, 2020 at 3:12 PM Pragnesh Patel <[email protected]> wrote: > > Hi Jagan, > > >-----Original Message----- > >From: Jagan Teki <[email protected]> > >Sent: 02 April 2020 14:42 > >To: Pragnesh Patel <[email protected]> > >Cc: U-Boot-Denx <[email protected]>; Atish Patra > ><[email protected]>; [email protected]; Bin Meng > ><[email protected]>; Paul Walmsley <[email protected]>; Troy > >Benjegerdes <[email protected]>; Anup Patel > ><[email protected]>; Sagar Kadam <[email protected]>; Rick Chen > ><[email protected]> > >Subject: Re: [PATCH v6 00/17] RISC-V SiFive FU540 support SPL > > > >[External Email] Do not click links or attachments unless you recognize the > >sender and know the content is safe > > > >On Sun, Mar 29, 2020 at 10:36 PM Pragnesh Patel > ><[email protected]> wrote: > >> > >> This series add support for SPL to FU540.U-Boot SPL can boot from > >> L2 LIM (0x0800_0000) and jump to OpenSBI(FW_DYNAMIC firmware) and > >> U-Boot proper from MMC devices. > >> > >> How to test this patch: > >> 1) Go to OpenSBI-dir : make PLATFORM=sifive/fu540 O=build_dir > >> I=install_dir FW_DYNAMIC=y install > >> 2) cp install_dir/platform/sifive/fu540/firmware/fw_dynamic.bin > >> <u-boot-dir>/ > > > >I think setting > >OPENSBI=<path/to/opensbi/install_dir/platform/sifive/fu540/firmware/fw_d > >ynamic.bin> > >would help to attach the opensbi instead of copying into the source > >directory. > >Would you please check that. > > Yes that will also work, if I need to submit v7 then will update this.
Thanks, please wait for sometime I'll send my comments for the rest of the patches. Jagan.
