Some boards need their board-specific PHY quirks to be called
to PHY to work normally. As mpc5xxx_fec driver uses on demand
PHY initialization and can even reinit PHY during normal operation
we can't count on reset_phy() call from arch/<arch>/lib/board.c
(it is most likely called _before_ we init the PHY from the
driver) so we need to add call to reset_phy() directly in the
driver.
Cc: Ben Warren <biggerbadder...@gmail.com>
Signed-off-by: Ilya Yanok <ya...@emcraft.com>
---
drivers/net/mpc5xxx_fec.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
index c88e596..bc8c922 100644
--- a/drivers/net/mpc5xxx_fec.c
+++ b/drivers/net/mpc5xxx_fec.c
@@ -250,6 +250,13 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t *
bis)
mpc5xxx_fec_init_phy(dev, bis);
/*
+ * Call board-specific PHY fixups (if any)
+ */
+#ifdef CONFIG_RESET_PHY_R
+ reset_phy();
+#endif
+
+ /*
* Initialize RxBD/TxBD rings
*/
mpc5xxx_fec_rbd_init(fec);
--
1.6.2.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
