On 5/20/20 2:22 PM, Tom Rini wrote:
> On Thu, May 07, 2020 at 08:36:03PM +0200, Jan Kiszka wrote:
>
>> From: Jan Kiszka <jan.kis...@siemens.com>
>>
>> This driver is safe to use in SPL without relocation. Denying
>> DM_FLAG_PRE_RELOC prevents its usability for verifying the main U-Boot
>> or other artifacts from the SPL unless needless enabling the full driver
>> set (SPL_OF_PLATDATA).
>>
>> Fixes: 17e117408571 ("drivers: crypto: rsa_mod_exp: avoid DM_FLAG_PRE_RELOC")
>> CC: Heinrich Schuchardt <xypron.g...@gmx.de>
>> CC: Marek Vasut <ma...@denx.de>
>> Signed-off-by: Jan Kiszka <jan.kis...@siemens.com>
>
> Applied to u-boot/master, thanks!
>With this patch applied pine64-lts_defconfig with CONFIG_RSA=y does not boot anymore. See the output below. So something is wrong with this driver. Do you have an idea how to analyze what is wrong? Unfortunately there is no DEBUG_UART available on the Pine A64 LTS board. Best regards Heinrich U-Boot SPL 2020.07-rc2-00070-g2fa581ba91 (May 22 2020 - 10:29:30 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.2():v2.2-1138-g78460ced4 NOTICE: BL31: Built : 05:50:47, Apr 7 2020 NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) NOTICE: BL31: Found U-Boot DTB at 0x4091998, model: Pine64 LTS INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP803 on RSB INFO: PMIC: dcdc1 voltage: 3.300V INFO: PMIC: dcdc5 voltage: 1.200V INFO: PMIC: dcdc6 voltage: 1.100V INFO: PMIC: dldo1 voltage: 3.300V INFO: PMIC: Enabling DC SW INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 843419 was applied INFO: BL31: cortex_a53: CPU workaround for 855873 was applied NOTICE: PSCI: System suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot SPL 2020.07-rc2-00070-g2fa581ba91 (May 22 2020 - 10:29:30 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.2():v2.2-1138-g78460ced4 NOTICE: BL31: Built : 05:50:47, Apr 7 2020 NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) NOTICE: BL31: Found U-Boot DTB at 0x4091998, model: Pine64 LTS INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP803 on RSB INFO: PMIC: dcdc1 voltage: 3.300V INFO: PMIC: dcdc5 voltage: 1.200V INFO: PMIC: dcdc6 voltage: 1.100V INFO: PMIC: dldo1 voltage: 3.300V INFO: PMIC: Enabling DC SW INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 843419 was applied INFO: BL31: cortex_a53: CPU workaround for 855873 was applied NOTICE: PSCI: System suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot SPL 2020.07-rc2-00070-g2fa581ba91 (May 22 2020 - 10:29:30 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.2():v2.2-1138-g78460ced4 NOTICE: BL31: Built : 05:50:47, Apr 7 2020 NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) NOTICE: BL31: Found U-Boot DTB at 0x4091998, model: Pine64 LTS INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP803 on RSB INFO: PMIC: dcdc1 voltage: 3.300V INFO: PMIC: dcdc5 voltage: 1.200V INFO: PMIC: dcdc6 voltage: 1.100V INFO: PMIC: dldo1 voltage: 3.300V INFO: PMIC: Enabling DC SW INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 843419 was applied INFO: BL31: cortex_a53: CPU workaround for 855873 was applied NOTICE: PSCI: System suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9
