Enable new features and provide require device-tree config so that U-Boot
produces the correct ACPI tables on Coral.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v3:
- Rebase to master
Changes in v2:
- Rebase to master
Changes in v1:
- Add NHLT information
- Fix i2c PCI addresses
- Rename acpi-probed to linux,probed
- Rename cpi,hid-desc-reg-offset to hid-desc-addr
- UIse hid-over-i2 compatible string
- Update ACPI ordering to include multiple CPUs
- Use acpi,ddn instead of acpi,desc
arch/x86/dts/chromebook_coral.dts | 224 +++++++++++++++++++++++++++--
configs/chromebook_coral_defconfig | 11 +-
2 files changed, 220 insertions(+), 15 deletions(-)
diff --git a/arch/x86/dts/chromebook_coral.dts
b/arch/x86/dts/chromebook_coral.dts
index a17a9c28003..8c08259b001 100644
--- a/arch/x86/dts/chromebook_coral.dts
+++ b/arch/x86/dts/chromebook_coral.dts
@@ -15,14 +15,20 @@
#include "flashmap-16mb-rw.dtsi"
#endif
+#include <dt-bindings/clock/intel-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/x86-irq.h>
+#include <asm/e820.h>
#include <asm/intel_pinctrl_defs.h>
#include <asm/arch-apollolake/cpu.h>
+#include <asm/arch-apollolake/gpe.h>
#include <asm/arch-apollolake/gpio.h>
#include <asm/arch-apollolake/iomap.h>
#include <asm/arch-apollolake/pm.h>
#include <dt-bindings/clock/intel-clock.h>
#include <asm/arch-apollolake/fsp/fsp_m_upd.h>
#include <asm/arch-apollolake/fsp/fsp_s_upd.h>
+#include <dt-bindings/sound/nhlt.h>
/ {
model = "Google Coral";
@@ -40,6 +46,14 @@
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
+ mmc1 = &sdmmc;
+ };
+
+ board: board {
+ compatible = "google,coral";
+ recovery-gpios = <&gpio_nw (-1) GPIO_ACTIVE_LOW>;
+ write-protect-gpios = <&gpio_nw GPIO_75 GPIO_ACTIVE_HIGH>;
+ phase-enforce-gpios = <&gpio_n GPIO_10 GPIO_ACTIVE_HIGH>;
};
config {
@@ -48,6 +62,15 @@
chosen {
stdout-path = &serial;
+ e820-entries = /bits/ 64 <
+ IOMAP_P2SB_BAR IOMAP_P2SB_SIZE E820_RESERVED
+ MCH_BASE_ADDRESS MCH_SIZE E820_RESERVED>;
+ u-boot,acpi-ssdt-order = <&cpu_0 &cpu_1 &cpu_2 &cpu_3
+ &i2c_0 &i2c_1 &i2c_2 &i2c_3 &i2c_4 &i2c_5
+ &sdmmc &maxim_codec &wifi &da_codec &tpm
+ &elan_touchscreen &raydium_touchscreen
+ &elan_touchpad &synaptics_touchpad &wacom_digitizer>;
+ u-boot,acpi-dsdt-order = <&board &lpc>;
};
clk: clock {
@@ -60,7 +83,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu_0: cpu@0 {
u-boot,dm-pre-reloc;
device_type = "cpu";
compatible = "intel,apl-cpu";
@@ -68,21 +91,21 @@
intel,apic-id = <0>;
};
- cpu@1 {
+ cpu_1: cpu@1 {
device_type = "cpu";
compatible = "intel,apl-cpu";
reg = <1>;
intel,apic-id = <2>;
};
- cpu@2 {
+ cpu_2: cpu@2 {
device_type = "cpu";
compatible = "intel,apl-cpu";
reg = <2>;
intel,apic-id = <4>;
};
- cpu@3 {
+ cpu_3: cpu@3 {
device_type = "cpu";
compatible = "intel,apl-cpu";
reg = <3>;
@@ -128,6 +151,10 @@
*/
fsp_s: fsp-s {
};
+
+ nhlt {
+ intel,dmic-channels = <4>;
+ };
};
punit@0,1 {
@@ -136,21 +163,29 @@
compatible = "intel,apl-punit";
};
+ gma@2,0 {
+ reg = <0x00001000 0 0 0 0>;
+ compatible = "vesa-fb";
+ };
+
p2sb: p2sb@d,0 {
u-boot,dm-pre-reloc;
reg = <0x02006810 0 0 0 0>;
compatible = "intel,p2sb";
early-regs = <IOMAP_P2SB_BAR 0x100000>;
+ pci,no-autoconfig;
n {
compatible = "intel,apl-pinctrl";
u-boot,dm-pre-reloc;
intel,p2sb-port-id = <PID_GPIO_N>;
+ acpi,path = "\\_SB.GPO0";
gpio_n: gpio-n {
compatible = "intel,gpio";
u-boot,dm-pre-reloc;
gpio-controller;
#gpio-cells = <2>;
+ linux-name = "INT3452:00";
};
};
@@ -159,11 +194,13 @@
compatible = "intel,apl-pinctrl";
intel,p2sb-port-id = <PID_GPIO_NW>;
#gpio-cells = <2>;
+ acpi,path = "\\_SB.GPO1";
gpio_nw: gpio-nw {
compatible = "intel,gpio";
u-boot,dm-pre-reloc;
gpio-controller;
#gpio-cells = <2>;
+ linux-name = "INT3452:01";
};
};
@@ -172,11 +209,13 @@
compatible = "intel,apl-pinctrl";
intel,p2sb-port-id = <PID_GPIO_W>;
#gpio-cells = <2>;
+ acpi,path = "\\_SB.GPO2";
gpio_w: gpio-w {
compatible = "intel,gpio";
u-boot,dm-pre-reloc;
gpio-controller;
#gpio-cells = <2>;
+ linux-name = "INT3452:02";
};
};
@@ -185,11 +224,13 @@
compatible = "intel,apl-pinctrl";
intel,p2sb-port-id = <PID_GPIO_SW>;
#gpio-cells = <2>;
+ acpi,path = "\\_SB.GPO3";
gpio_sw: gpio-sw {
compatible = "intel,gpio";
u-boot,dm-pre-reloc;
gpio-controller;
#gpio-cells = <2>;
+ linux-name = "INT3452:03";
};
};
@@ -238,6 +279,24 @@
gpe0-en = <0x30>;
};
+ audio@e,0 {
+ reg = <0x7000 0 0 0 0>;
+ compatible = "simple-bus";
+ acpi,name = "HDAS";
+ i2s {
+ compatible = "fred";
+ };
+ maxim_codec: maxim-codec {
+ compatible = "maxim,max98357a";
+ acpi,ddn = "Maxim Integrated 98357A Amplifier";
+ sdmode-gpios = <&gpio_n GPIO_76
GPIO_ACTIVE_HIGH>;
+ sdmode-delay = <5>;
+ acpi,name = "MAXM";
+ acpi,hid = "MX98357A";
+ acpi,audio-link = <AUDIO_LINK_SSP5>;
+ };
+ };
+
spi: fast-spi@d,2 {
u-boot,dm-pre-reloc;
reg = <0x02006a10 0 0 0 0>;
@@ -267,19 +326,63 @@
};
};
+ /* WiFi */
+ pcie-a0@14,0 {
+ reg = <0x0000a000 0 0 0 0>;
+ acpi,name = "RP01";
+ wifi: wifi {
+ compatible = "intel,generic-wifi";
+ acpi,ddn = "Intel WiFi";
+ acpi,name = "WF00";
+ acpi,wake = <GPE0_DW3_00>;
+ interrupts-extended = <&acpi_gpe 0x3c 0>;
+ };
+ };
+
i2c_0: i2c2@16,0 {
compatible = "intel,apl-i2c";
reg = <0x0200b010 0 0 0 0>;
clocks = <&clk CLK_I2C>;
i2c-scl-rising-time-ns = <104>;
i2c-scl-falling-time-ns = <52>;
+ clock-frequency = <400000>;
+ i2c,speeds = <100000 400000 1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ da_codec: da-codec {
+ reg = <0x1a>;
+ compatible = "dlg,da7219";
+ interrupts-extended = <&acpi_gpe GPIO_116_IRQ
+ (IRQ_TYPE_LEVEL_LOW |
X86_IRQ_TYPE_SHARED)>;
+ acpi,name = "DLG7";
+ acpi,ddn = "Dialog Semiconductor DA7219 Audio
Codec";
+ acpi,audio-link = <AUDIO_LINK_SSP1>;
+ dlg,micbias-lvl = <2600>;
+ dlg,mic-amp-in-sel = "diff";
+ da7219_aad {
+ dlg,btn-cfg = <50>;
+ dlg,mic-det-thr = <500>;
+ dlg,jack-ins-deb = <20>;
+ dlg,jack-det-rate = "32ms_64ms";
+ dlg,jack-rem-deb = <1>;
+ dlg,a-d-btn-thr = <0xa>;
+ dlg,d-b-btn-thr = <0x16>;
+ dlg,b-c-btn-thr = <0x21>;
+ dlg,c-mic-btn-thr = <0x3e>;
+ dlg,btn-avg = <4>;
+ dlg,adc-1bit-rpt = <1>;
+ };
+ };
};
i2c_1: i2c2@16,1 {
compatible = "intel,apl-i2c";
reg = <0x0200b110 0 0 0 0>;
clocks = <&clk CLK_I2C>;
- status = "disabled";
+ clock-frequency = <400000>;
+ i2c,speeds = <100000 400000 1000000 3400000>;
+ i2c-scl-rising-time-ns = <52>;
+ i2c-scl-falling-time-ns = <52>;
};
i2c_2: i2c2@16,2 {
@@ -288,53 +391,130 @@
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
+ i2c,speeds = <100000 400000 1000000>;
clocks = <&clk CLK_I2C>;
i2c-scl-rising-time-ns = <57>;
i2c-scl-falling-time-ns = <28>;
- tpm@50 {
+ tpm: tpm@50 {
reg = <0x50>;
compatible = "google,cr50";
u-boot,i2c-offset-len = <0>;
ready-gpios = <&gpio_n 28 GPIO_ACTIVE_LOW>;
- interrupts-extended = <&acpi_gpe 0x3c 0>;
+ interrupts-extended = <&acpi_gpe GPIO_28_IRQ
+ IRQ_TYPE_EDGE_FALLING>;
+ acpi,hid = "GOOG0005";
+ acpi,ddn = "I2C TPM";
+ acpi,name = "TPMI";
};
};
i2c_3: i2c2@16,3 {
compatible = "intel,apl-i2c";
- reg = <0x0200b110 0 0 0 0>;
+ reg = <0x0200b310 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&clk CLK_I2C>;
i2c-scl-rising-time-ns = <76>;
i2c-scl-falling-time-ns = <164>;
+ clock-frequency = <400000>;
+ i2c,speeds = <100000 400000>;
+ elan_touchscreen: elan-touchscreen@10 {
+ compatible = "i2c-chip";
+ reg = <0x10>;
+ acpi,hid = "ELAN0001";
+ acpi,ddn = "ELAN Touchscreen";
+ interrupts-extended = <&acpi_gpe GPIO_21_IRQ
+ IRQ_TYPE_EDGE_FALLING>;
+ linux,probed;
+ reset-gpios = <&gpio_n GPIO_36
GPIO_ACTIVE_HIGH>;
+ reset-delay-ms = <20>;
+ enable-gpios = <&gpio_n GPIO_152
GPIO_ACTIVE_HIGH>;
+ enable-delay-ms = <1>;
+ acpi,has-power-resource;
+ };
+
+ raydium_touchscreen: raydium-touchscreen@39 {
+ compatible = "i2c-chip";
+ reg = <0x39>;
+ acpi,hid = "RAYD0001";
+ acpi,ddn = "Raydium Touchscreen";
+ interrupts-extended = <&acpi_gpe GPIO_21_IRQ
+ IRQ_TYPE_EDGE_FALLING>;
+ linux,probed;
+ reset-gpios = <&gpio_n GPIO_36
GPIO_ACTIVE_HIGH>;
+ reset-delay-ms = <1>;
+ enable-gpios = <&gpio_n GPIO_152
GPIO_ACTIVE_HIGH>;
+ enable-delay-ms = <50>;
+ acpi,has-power-resource;
+ };
};
i2c_4: i2c2@17,0 {
compatible = "intel,apl-i2c";
- reg = <0x0200b110 0 0 0 0>;
+ reg = <0x0200b810 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&clk CLK_I2C>;
i2c-sda-hold-time-ns = <350>;
i2c-scl-rising-time-ns = <114>;
i2c-scl-falling-time-ns = <164>;
+ clock-frequency = <400000>;
+ i2c,speeds = <100000 400000>;
+ elan_touchpad: elan-touchpad@15 {
+ compatible = "i2c-chip";
+ reg = <0x15>;
+ u-boot,i2c-offset-len = <0>;
+ acpi,hid = "ELAN0000";
+ acpi,ddn = "ELAN Touchpad";
+ interrupts-extended = <&acpi_gpe GPIO_18_IRQ
+ IRQ_TYPE_EDGE_FALLING>;
+ acpi,wake = <GPE0_DW1_15>;
+ linux,probed;
+ };
+ synaptics_touchpad: synaptics-touchpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ acpi,hid = "PNP0C50";
+ acpi,ddn = "Synaptics Touchpad";
+ interrupts-extended = <&acpi_gpe GPIO_18_IRQ
+ IRQ_TYPE_EDGE_FALLING>;
+ acpi,wake = <GPE0_DW1_15>;
+ linux,probed;
+ hid-descr-addr = <0x20>;
+ };
};
i2c_5: i2c2@17,1 {
compatible = "intel,apl-i2c";
- reg = <0x0200b110 0 0 0 0>;
+ reg = <0x0200b910 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&clk CLK_I2C>;
i2c-scl-rising-time-ns = <76>;
i2c-scl-falling-time-ns = <164>;
+ clock-frequency = <400000>;
+ i2c,speeds = <100000 400000 1000000>;
+ wacom_digitizer: wacom-digitizer@9 {
+ compatible = "hid-over-i2c";
+ reg = <0x9>;
+ acpi,hid = "WCOM50C1";
+ acpi,ddn = "WCOM Digitizer";
+ interrupts-extended = <&acpi_gpe GPIO_13_IRQ
+ (IRQ_TYPE_LEVEL_LOW |
X86_IRQ_TYPE_SHARED)>;
+ hid-descr-addr = <0x1>;
+ };
};
i2c_6: i2c2@17,2 {
compatible = "intel,apl-i2c";
- reg = <0x0200b110 0 0 0 0>;
+ reg = <0x0200ba10 0 0 0 0>;
clocks = <&clk CLK_I2C>;
status = "disabled";
};
i2c_7: i2c2@17,3 {
compatible = "intel,apl-i2c";
- reg = <0x0200b110 0 0 0 0>;
+ reg = <0x0200bb10 0 0 0 0>;
clocks = <&clk CLK_I2C>;
status = "disabled";
};
@@ -347,6 +527,15 @@
reg-shift = <2>;
clock-frequency = <1843200>;
current-speed = <115200>;
+ acpi,name = "URT3";
+ pci,no-autoconfig;
+ };
+
+ sdmmc: sdmmc@1b,0 {
+ reg = <0x0000d800 0 0 0 0>;
+ compatible = "intel,apl-sd";
+ cd-gpios = <&gpio_n GPIO_177 GPIO_ACTIVE_LOW>;
+ acpi,name = "SDCD";
};
pch: pch@1f,0 {
@@ -356,7 +545,7 @@
#address-cells = <1>;
#size-cells = <1>;
- lpc {
+ lpc: lpc {
compatible = "intel,apl-lpc";
#address-cells = <1>;
#size-cells = <0>;
@@ -600,6 +789,11 @@
fsps,emmc-rx-cmd-data-cntl1 = <0x00181717>;
fsps,emmc-rx-cmd-data-cntl2 = <0x10008>;
+ /* Enable Audio Clock and Power gating */
+ fsps,hd-audio-clk-gate = <1>;
+ fsps,hd-audio-pwr-gate = <1>;
+ fsps,bios-cfg-lock-down = <1>;
+
/* Enable WiFi */
fsps,pcie-root-port-en = [01 00 00 00 00 00];
fsps,pcie-rp-hot-plug = [00 00 00 00 00 00];
@@ -611,6 +805,10 @@
fsps,port-usb20-per-port-pe-txi-set = [07 07 06 06 07 07 07 01];
fsps,port-usb20-per-port-txi-set = [00 02 00 00 00 00 00 03];
+ fsps,lpss-s0ix-enable = <1>;
+ fsps,usb-otg = <0>;
+ fsps,monitor-mwait-enable = <0>;
+
/*
* TODO(s...@chromium.org): Move this to the I2C nodes
* Intel Common SoC Config
diff --git a/configs/chromebook_coral_defconfig
b/configs/chromebook_coral_defconfig
index ef4dabbe26e..af0397ff1f4 100644
--- a/configs/chromebook_coral_defconfig
+++ b/configs/chromebook_coral_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x3d00
CONFIG_NR_DRAM_BANKS=8
CONFIG_SPL_DM_SPI=y
CONFIG_SPL_TEXT_BASE=0xfef10000
+CONFIG_MAX_CPUS=8
CONFIG_SPL_SYS_MALLOC_F_LEN=0xf000
CONFIG_BOOTSTAGE_STASH_ADDR=0xfef00000
CONFIG_DEBUG_UART_BOARD_INIT=y
@@ -14,9 +15,10 @@ CONFIG_VENDOR_GOOGLE=y
CONFIG_TARGET_CHROMEBOOK_CORAL=y
CONFIG_DEBUG_UART=y
CONFIG_FSP_VERSION2=y
+CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_INTEL_CAR_CQOS=y
-CONFIG_X86_OFFSET_U_BOOT=0xffe00000
+CONFIG_X86_OFFSET_U_BOOT=0xffd00000
CONFIG_X86_OFFSET_SPL=0xffe80000
CONFIG_INTEL_GENERIC_WIFI=y
CONFIG_BOOTSTAGE=y
@@ -26,13 +28,14 @@ CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SPL_BOOTSTAGE_RECORD_COUNT=10
CONFIG_BOOTSTAGE_STASH=y
CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro earlyprintk
console=tty0 console=ttyS0,115200"
+CONFIG_BOOTARGS="console=ttyS2,115200n8 cros_legacy loglevel=9 init=/sbin/init
oops=panic panic=-1
root=PARTUUID=35c775e7-3735-d745-93e5-d9e0238f7ed0/PARTNROFF=1 rootwait rw
noinitrd vt.global_cursor_default=0 add_efi_memmap boot=local noresume noswap
i915.modeset=1 nmi_watchdog=panic,lapic disablevmx=off"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL_LOG=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_BLOBLIST=y
# CONFIG_TPL_BLOBLIST is not set
+CONFIG_BLOBLIST_SIZE=0x30000
CONFIG_BLOBLIST_ADDR=0x100000
CONFIG_HANDOFF=y
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
@@ -74,8 +77,10 @@ CONFIG_SYSCON=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_INTEL_ACPIGEN=y
CONFIG_CPU=y
+CONFIG_BOARD=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_DW=y
+CONFIG_MISC=y
CONFIG_TPL_MISC=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_LPC=y
@@ -87,7 +92,9 @@ CONFIG_PINCTRL=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_SOUND=y
+CONFIG_SOUND_DA7219=y
CONFIG_SOUND_I8254=y
+CONFIG_SOUND_MAX98357A=y
CONFIG_SOUND_RT5677=y
CONFIG_SPI=y
CONFIG_ICH_SPI=y
--
2.28.0.526.ge36021eeef-goog
