On Sat, Sep 25, 2010 at 5:37 PM, Wolfgang Denk <[email protected]> wrote: > Dear Xianghua Xiao, > > In message <[email protected]> you > wrote: >> >> Has anyone seen this, binutils 2.10.1 can never finish generating srec by >> doing: >> objcopy --gap-fill=0xff -O srec u-boot u-boot.srec >> >> however with new u-boot release it works fine, the u-boot.srec can be >> produced quickly. > > Hmmm... binutils 2.10.1 are 10 (in words: TEN !!!) years old. > > It takes some courage to dig out such old code... > > U-Boot 1.2.0 is also way over 3 years old. > > > Please consider both versions as hopelessly obsoleted and completely > unsupported. > > > Please update both U-Boot and especially your tool chain. > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] > "Virtual" means never knowing where your next byte is coming from. >
my bad, it's 2.20.1 instead of 2.10.1. also tried 2.19 the same problem stays. of course 2.20.1 with newest u-boot works perfectly fine. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
