The following patches add support for higher speeds in the SD card and
eMMC for TI's am65x, j721e, j7200 platforms.
After these patches j721e and j7200 will support ultra high speed while
am65x will support upto high speed modes.
Faiz Abbas (17):
mmc: sdhci: Add helper functions for UHS modes
mmc: am654_sdhci: Unconditionally switch off DLL in the beginning of
ios_post()
mmc: am654_sdhci: Convert flag fields to BIT macro
mmc: am654_sdhci: Add flag for PHY calibration
mmc: am654_sdhci: Add support for AM65x SR2.0
mmc: am654_sdhci: Add support for input tap delay
mmc: am654_sdhci: Add support for writing to clkbuf_sel
mmc: am654_sdhci: Add support for software tuning
mmc: am654_sdhci: Fix HISPD bit configuration in some lower speed
modes
mmc: am654_sdhci: Use sdhci_set_control_reg()
arm: dts: k3-am65: Fix mmc nodes
arm: dts: k3-j721e-main: Update otap-delay values
arm: dts: k3-j721e-common-proc-board: Add support for UHS modes for SD
card
arm: dts: k3-j7200-main: Add support for gpio0
arm: dts: k3-j7200-common-proc-board: Enable support for UHS modes
configs: j721e_evm: Add support for UHS modes
configs: j7200_evm: Add support for UHS modes
arch/arm/dts/k3-am65-main.dtsi | 22 +
arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 67 +--
arch/arm/dts/k3-am654-base-board.dts | 25 ++
arch/arm/dts/k3-am654-r5-base-board.dts | 20 +-
arch/arm/dts/k3-j7200-common-proc-board.dts | 49 ++-
arch/arm/dts/k3-j7200-main.dtsi | 22 +
.../arm/dts/k3-j7200-r5-common-proc-board.dts | 15 +
arch/arm/dts/k3-j721e-common-proc-board.dts | 32 ++
arch/arm/dts/k3-j721e-main.dtsi | 5 +-
configs/j7200_evm_a72_defconfig | 8 +
configs/j7200_evm_r5_defconfig | 1 +
configs/j721e_evm_a72_defconfig | 8 +
configs/j721e_evm_r5_defconfig | 1 +
drivers/mmc/Kconfig | 1 +
drivers/mmc/am654_sdhci.c | 384 +++++++++++++-----
drivers/mmc/sdhci.c | 49 +++
include/sdhci.h | 1 +
17 files changed, 537 insertions(+), 173 deletions(-)
--
2.17.1
