Hi Simon, > From: Simon Glass <[email protected]> > Sent: lundi 26 octobre 2020 20:23 > > Hi Patrick, > > On Thu, 15 Oct 2020 at 09:59, Patrick DELAUNAY <[email protected]> > wrote: > > > > Hi Simon, > > > > > From: Simon Glass <[email protected]> > > > Sent: jeudi 15 octobre 2020 17:06 > > > > > > Hi Patrick, > > > > > > On Wed, 14 Oct 2020 at 03:16, Patrick Delaunay > > > <[email protected]> > > > wrote: > > > > > > > > > > > > This patch-set migrates several stm32 drivers to API compatible > > > > with logging features (use dev_...() or log_...() function) and > > > > activate the logging features in STM32MP15 boards. > > > > > > > > The size of U-Boot increased by 19kB (933026 to 952830 on > > > > STM32MP157C-EV1 board for basic defconfig) but the boot time don't > > > > change > > > drastically. > > > > > > >
(...) > > > > For information even with all trace embbeded in U-Boot but not > > > > activated, MAX_LOG_LEVEL=8 and LOG_DEFAULT_LEVEL=6 > > > > > > > > Size increase by 190KB (952830 to 1147918) but boot time is stable > > > > (1,748s vs 1,696s). > > > > > > This seems pretty bad. Is this because of console output, or > > > something else? I understand the size increase, but not the boot time > increase. > > > > For this last point I just execute STM32MP157C-EV1 boot with a patch > > in configs/stm32mp15_basic_defconfig > > > > +CONFIG_LOGLEVEL=8 > > +CONFIG_LOG_MAX_LEVEL=8 > > +CONFIG_LOG_DEFAULT_LEVEL=6 > > +CONFIG_LOGF_FILE=y > > +CONFIG_LOGF_LINE=y > > +CONFIG_LOGF_FUNC=y > > > > And execute "bootstage report" after the second boot (the first boot > > is pertubated by env save) > > > > I think the delta is linked to > > 1/ size of U-Boot (SPL spent more time to load U-Boot) > > end of SPL 987,579 => 996,117 > > OK. > > > > > 2/ time to check for each debug trace: because I increase the log level > > (gd->default_log_level = 6 < MAX_LOG_LEVEL=8) > > This might be the biggest part. If you look at _log() it always does the > vsprintf() > even if in fact log_dispatch() does not dispatch it to anything. Yes, log_dispatch / log_passes_filter are called after vsnprintf > I suspect that could be refactored to move the checking to a separate > function, > and then call it before doing the expensive vsprintf(). Or save va_list, fmt in log_rec and call vsnprintf allow when needed in log_dispatch, just before emit > > > > 3/ treatment added in log_console_emit (some printf) and > > log_dispatch (processing_msg / gd->loghead) > > Likely this is fast. > > > > > 4/ lower cache performancy as trace code are pesent in memory even > > they are not used > > > > Can I do some check/experimentation on my side ? > > Yes, if you can use the bootstage_start() and bootstage_accum() within the > _log() > function to measure the total time take in the run. Ok, I add it in my TODO list > Regards, > Simon Regards Patrick
