> -----Original Message----- > From: Rogan Dawes [mailto:[email protected]] On Behalf Of > Rogan Dawes > Sent: Thursday, September 30, 2010 7:24 PM > To: Prafulla Wadaskar > Cc: [email protected]; Ashish Karkare; Prabhanjan Sarnaik > Subject: Re: [U-Boot] [PATCH] kirkwood: added common config > file mv-config.h > > On 2010/09/30 7:53 PM, Prafulla Wadaskar wrote: > > > diff --git a/include/configs/mv-common.h > b/include/configs/mv-common.h > > > @@ -0,0 +1,230 @@ > > +#ifndef _MV_COMMON_H > > +#define _MV_COMMON_H > > + > > +/* > > + * High Level Configuration Options (easy to change) > > + */ > > +#define CONFIG_MARVELL 1 > > +#define CONFIG_ARM926EJS 1 /* Basic Architecture */ > > + > > +#if defined(CONFIG_KIRKWOOD) > > +#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 > support */ > > krikwood?
Thanks I will correct this. > > > +#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 > for kernel */ > > +#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII > Pad voltage to 1.8V */ > > +#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE > Port0 for kernel */ > > + > > +#define CONFIG_I2C_MVTWSI_BASE KW_TWSI_BASE > > > +#define MV_UART0_BASE KW_UART0_BASE > > +#define MV_UART0_BASE KW_UART0_BASE > > dup? !! I will remove this additional line > > > +/* > > + * IDe Support on SATA port0 > > + */ > > IDe? I think Ide can be removed, right? Regards.. Prafulla . . > > Rogan > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
