> -----Original Message-----
> From: Lim, Elly Siew Chin <[email protected]>
> Sent: Thursday, January 7, 2021 6:04 PM
> To: [email protected]
> Cc: Marek Vasut <[email protected]>; Tan, Ley Foon
> <[email protected]>; See, Chin Liang <[email protected]>;
> Simon Goldschmidt <[email protected]>; Chee, Tien Fong
> <[email protected]>; Westergreen, Dalon
> <[email protected]>; Simon Glass <[email protected]>; Gan,
> Yau Wai <[email protected]>; Lim, Elly Siew Chin
> <[email protected]>
> Subject: [v2 6/6] configs: socfpga: Add defconfig for Agilex with VAB support
>
> Booting Agilex with Vendor Authorized Boot.
>
> Signed-off-by: Siew Chin Lim <[email protected]>
>
> ---
> v2
> ---
> - Renamed CONFIG_SECURE_VAB_AUTH to
> CONFIG_SOCFPGA_SECURE_VAB_AUTH
> - Add BOOTCOMMAND macro in defconfig
> ---
> .../{socfpga_agilex_atf_defconfig => socfpga_agilex_vab_defconfig} | 5
> +++--
> 1 file changed, 3 insertions(+), 2 deletions(-) copy
> configs/{socfpga_agilex_atf_defconfig => socfpga_agilex_vab_defconfig}
> (92%)
>
> diff --git a/configs/socfpga_agilex_atf_defconfig
> b/configs/socfpga_agilex_vab_defconfig
> similarity index 92%
> copy from configs/socfpga_agilex_atf_defconfig
> copy to configs/socfpga_agilex_vab_defconfig
> index 704a9d56b9..1e28efea5e 100644
> --- a/configs/socfpga_agilex_atf_defconfig
> +++ b/configs/socfpga_agilex_vab_defconfig
> @@ -1,5 +1,4 @@
> CONFIG_ARM=y
> -CONFIG_ARM_SMCCC=y
> CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds"
> CONFIG_ARCH_SOCFPGA=y
> CONFIG_SYS_TEXT_BASE=0x200000
> @@ -8,6 +7,7 @@ CONFIG_ENV_SIZE=0x1000
> CONFIG_ENV_OFFSET=0x200
> CONFIG_DM_GPIO=y
> CONFIG_NR_DRAM_BANKS=2
> +CONFIG_SOCFPGA_SECURE_VAB_AUTH=y
> CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
> CONFIG_IDENT_STRING="socfpga_agilex"
> CONFIG_SPL_FS_FAT=y
> @@ -15,12 +15,13 @@ CONFIG_SPL_TEXT_BASE=0xFFE00000
> CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y
> CONFIG_SPL_LOAD_FIT_ADDRESS=0x02000000
> +# CONFIG_LEGACY_IMAGE_FORMAT is not set
> # CONFIG_USE_SPL_FIT_GENERATOR is not set
> CONFIG_BOOTDELAY=5
> CONFIG_USE_BOOTARGS=y
> CONFIG_BOOTARGS="earlycon"
> CONFIG_USE_BOOTCOMMAND=y
> -CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run
> linux_qspi_enable; run mmcfitboot"
> +CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run mmcfitboot"
Don't need "run linux_qspi_enable"?
Regards
Ley Foon
