This patch series adds NAND support to the da850evm. The support is in the spirit of that found in the omap-l1 and u-boot-davinci trees where NAND support can be enabled with the addition of a single '#define CONFIG_USE_NAND' to the top of the include/configs/da850evm.h file. Pinmux entries are added for NAND so that NAND is usable even when the boot mode is not from NAND. Also the mtdpart, ubi and ubifs commands are proposed to be added to the NAND support because of their importance when using NAND.
Ben Gardiner (5): davinci_nand, trivial : use symbolic ECC start command da850evm : enable NAND even when not in NAND boot mode da850evm: setup the NAND flash timings da850evm: setup NAND support under CONFIG_USE_NAND da850evm: add mtdpart and ubi commands with NAND support board/davinci/da8xxevm/da850evm.c | 40 +++++++++++++++++++++++++++++++++++++ drivers/mtd/nand/davinci_nand.c | 3 +- include/configs/da850evm.h | 37 ++++++++++++++++++++++++++++++++++ 3 files changed, 79 insertions(+), 1 deletions(-) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot