On Thu, May 27, 2021 at 7:20 PM Tom Rini <[email protected]> wrote: > On Thu, May 27, 2021 at 06:41:35PM +0800, Leo Liang wrote: > > On Thu, May 27, 2021 at 04:57:17PM +0800, Green Wan wrote: > > > Hi Tom, > > > > > > Thanks for the comments. > > > > > > Not sure whether it catches different concerns, I plan to remove > fdt_high and initrd_high since the bootm_* settings should be > sufficient to calculate the values related to fdt_high and initrd_high. And > I checked the bootm_* settings as below, the system can > > > boot without fdt_high and initrd_high. > > > > > > - bootm_low is set to CONFIG_SYS_SDRAM_BASE > > > - bootm_size is set to gd->ram_size (which comes from DT) > > > - bootm_mapsize is now equal to bootm_size > > > - boot log without fdt_high and initrd_high > > > "## Flattened Device Tree blob at 88000000 > > > Booting using the fdt blob at 0x88000000 > > > Loading Device Tree to 00000000ffffa000, end 00000000fffff64d ... > OK" > > > > > > Hi Leo/Rick, > > > > > > Should I create v12 for fu740 series patchset based on > u-boot-riscv.git ? or revert [PATCH v11 7/8] plus a patch? Thanks a lot! > > > > > > Regards, > > > Green > > > > Hi Green, > > > > I think you could just create v12 patch. > > I will do the revert, thanks! >
Hi Leo, Thanks for the help. I just posted the v12 patchset. -- Green > > Thanks for sorting this out quickly! > > -- > Tom >
