R5 SPL needs access to cfg space of Rings and UDMAP, therefore add RING
CFG, TCHAN CFG and RCHAN CFG address ranges.
Note that these registers are present within respective IPs but are
not populated in Linux DT nodes (as they are configured via TISCI APIs)
and hence are added to -u-boot.dtsi for now.
Signed-off-by: Vignesh Raghavendra <vigne...@ti.com>
---
arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 14 ++++++++++
.../k3-j7200-common-proc-board-u-boot.dtsi | 26 +++++++++++++++++++
.../k3-j721e-common-proc-board-u-boot.dtsi | 14 ++++++++++
3 files changed, 54 insertions(+)
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index b0602d1dad..2840258518 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -35,11 +35,25 @@
u-boot,dm-spl;
ringacc@2b800000 {
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>,
+ <0x0 0x28440000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg",
"proxy_target", "cfg";
u-boot,dm-spl;
ti,dma-ring-reset-quirk;
};
dma-controller@285c0000 {
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchan", "rchanrt", "tchan",
+ "tchanrt", "rflow";
u-boot,dm-spl;
};
};
diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
index c3aae65b39..41ce9fcb59 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
@@ -40,6 +40,32 @@
chipid@43000014 {
u-boot,dm-spl;
};
+
+ mcu-navss{
+ u-boot,dm-spl;
+
+ ringacc@2b800000 {
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>,
+ <0x0 0x28440000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg",
"proxy_target", "cfg";
+ u-boot,dm-spl;
+ };
+
+ dma-controller@285c0000 {
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchan", "rchanrt", "tchan",
+ "tchanrt", "rflow";
+ u-boot,dm-spl;
+ };
+ };
};
&secure_proxy_main {
diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
index 951331831e..974dae8416 100644
--- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
@@ -54,10 +54,24 @@
u-boot,dm-spl;
ringacc@2b800000 {
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>,
+ <0x0 0x28440000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg",
"proxy_target", "cfg";
u-boot,dm-spl;
};
dma-controller@285c0000 {
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchan", "rchanrt", "tchan",
+ "tchanrt", "rflow";
u-boot,dm-spl;
};
};
--
2.31.1
