On the Yocto image there is a single partition and the kernel and dtb are present in the 'boot' directory.
Change it accordingly so that the board can boot the Yocto image by default. Use the generic 'load' command instead, which is able to read from an ext4 partition. Signed-off-by: Fabio Estevam <[email protected]> --- include/configs/smegw01.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h index 50f00136ac46..a92c583c8669 100644 --- a/include/configs/smegw01.h +++ b/include/configs/smegw01.h @@ -29,11 +29,11 @@ "bootm_size=0x10000000\0" \ "mmcdev=0\0" \ "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ + "mmcroot=/dev/mmcblk0p1 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \ + "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}\0" \ + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if run loadfdt; then " \ -- 2.25.1
