On Tue, Jun 15, 2021 at 08:38:38PM -0300, Fabio Estevam wrote: > On the Yocto image there is a single partition and the kernel > and dtb are present in the 'boot' directory. > > Change it accordingly so that the board can boot the Yocto > image by default. > > Use the generic 'load' command instead, which is able to > read from an ext4 partition. > > Signed-off-by: Fabio Estevam <[email protected]> > --- > include/configs/smegw01.h | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h > index 50f00136ac46..a92c583c8669 100644 > --- a/include/configs/smegw01.h > +++ b/include/configs/smegw01.h > @@ -29,11 +29,11 @@ > "bootm_size=0x10000000\0" \ > "mmcdev=0\0" \ > "mmcpart=1\0" \ > - "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ > + "mmcroot=/dev/mmcblk0p1 rootwait rw\0" \ > "mmcargs=setenv bootargs console=${console},${baudrate} " \ > "root=${mmcroot}\0" \ > - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ > - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \ > + "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}\0" \ > + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}\0" \ > "mmcboot=echo Booting from mmc ...; " \ > "run mmcargs; " \ > "if run loadfdt; then " \
Shouldn't this be using the generic distro boot and then generating an extlinux.conf in OE? Thanks! -- Tom
signature.asc
Description: PGP signature
