Peter Robinson <[email protected]> 于2021年7月22日周四 下午11:21写道： > > Sync the rk3368 DTs and associated bits from 5.14-rc1. > > Signed-off-by: Peter Robinson <[email protected]>
Reviewed-by: Kever Yang <[email protected]> Thanks, - Kever > --- > arch/arm/dts/rk3368-geekbox.dts | 70 +++-------- > arch/arm/dts/rk3368-lion-haikou.dts | 4 + > arch/arm/dts/rk3368-lion.dtsi | 21 +--- > arch/arm/dts/rk3368-px5-evb.dts | 178 +++++++++++----------------- > arch/arm/dts/rk3368.dtsi | 65 +++++----- > 5 files changed, 118 insertions(+), 220 deletions(-) > > diff --git a/arch/arm/dts/rk3368-geekbox.dts b/arch/arm/dts/rk3368-geekbox.dts > index 46cdddfcea..62aa97a0b8 100644 > --- a/arch/arm/dts/rk3368-geekbox.dts > +++ b/arch/arm/dts/rk3368-geekbox.dts > @@ -1,43 +1,6 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > /* > * Copyright (c) 2016 Andreas Färber > - * > - * This file is dual-licensed: you can use it either under the terms > - * of the GPL or the X11 license, at your option. Note that this dual > - * licensing only applies to this file, and not this project as a > - * whole. > - * > - * a) This file is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; either version 2 of the > - * License, or (at your option) any later version. > - * > - * This file is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * Or, alternatively, > - * > - * b) Permission is hereby granted, free of charge, to any person > - * obtaining a copy of this software and associated documentation > - * files (the "Software"), to deal in the Software without > - * restriction, including without limitation the rights to use, > - * copy, modify, merge, publish, distribute, sublicense, and/or > - * sell copies of the Software, and to permit persons to whom the > - * Software is furnished to do so, subject to the following > - * conditions: > - * > - * The above copyright notice and this permission notice shall be > - * included in all copies or substantial portions of the Software. > - * > - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > - * OTHER DEALINGS IN THE SOFTWARE. > */ > > /dts-v1/; > @@ -48,6 +11,10 @@ > model = "GeekBox"; > compatible = "geekbuying,geekbox", "rockchip,rk3368"; > > + aliases { > + mmc0 = &emmc; > + }; > + > chosen { > stdout-path = "serial2:115200n8"; > }; > @@ -66,7 +33,7 @@ > > ir: ir-receiver { > compatible = "gpio-ir-receiver"; > - gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; > + gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>; > pinctrl-names = "default"; > pinctrl-0 = <&ir_int>; > }; > @@ -77,7 +44,7 @@ > pinctrl-0 = <&pwr_key>; > > power { > - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; > + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; > label = "GPIO Power"; > linux,code = <KEY_POWER>; > wakeup-source; > @@ -87,14 +54,14 @@ > leds: gpio-leds { > compatible = "gpio-leds"; > > - blue { > - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; > + blue_led: led-0 { > + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; > label = "geekbox:blue:led"; > default-state = "on"; > }; > > - red { > - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; > + red_led: led-1 { > + gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; > label = "geekbox:red:led"; > default-state = "off"; > }; > @@ -115,10 +82,7 @@ > bus-width = <8>; > cap-mmc-highspeed; > clock-frequency = <150000000>; > - disable-wp; > - keep-power-in-suspend; > non-removable; > - num-slots = <1>; > vmmc-supply = <&vcc_io>; > vqmmc-supply = <&vcc18_flash>; > pinctrl-names = "default"; > @@ -147,7 +111,7 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pmic_int>, <&pmic_sleep>; > interrupt-parent = <&gpio0>; > - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; > + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; > rockchip,system-power-controller; > vcc1-supply = <&vcc_sys>; > vcc2-supply = <&vcc_sys>; > @@ -258,8 +222,6 @@ > }; > > vcc_sd: SWITCH_REG1 { > - regulator-always-on; > - regulator-boot-on; > regulator-name = "vcc_sd"; > }; > > @@ -275,23 +237,23 @@ > &pinctrl { > ir { > ir_int: ir-int { > - rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO > &pcfg_pull_none>; > }; > }; > > keys { > pwr_key: pwr-key { > - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO > &pcfg_pull_none>; > }; > }; > > pmic { > pmic_sleep: pmic-sleep { > - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; > + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; > }; > > pmic_int: pmic-int { > - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > }; > }; > }; > diff --git a/arch/arm/dts/rk3368-lion-haikou.dts > b/arch/arm/dts/rk3368-lion-haikou.dts > index 7fcb1eacea..cae01d35b9 100644 > --- a/arch/arm/dts/rk3368-lion-haikou.dts > +++ b/arch/arm/dts/rk3368-lion-haikou.dts > @@ -10,6 +10,10 @@ > model = "Theobroma Systems RK3368-uQ7 Baseboard"; > compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368"; > > + aliases { > + mmc1 = &sdmmc; > + }; > + > chosen { > stdout-path = "serial0:115200n8"; > }; > diff --git a/arch/arm/dts/rk3368-lion.dtsi b/arch/arm/dts/rk3368-lion.dtsi > index 532e6a6828..bcd7977fb0 100644 > --- a/arch/arm/dts/rk3368-lion.dtsi > +++ b/arch/arm/dts/rk3368-lion.dtsi > @@ -7,6 +7,10 @@ > #include "rk3368.dtsi" > > / { > + aliases { > + mmc0 = &emmc; > + }; > + > chosen { > stdout-path = "serial0:115200n8"; > }; > @@ -150,7 +154,6 @@ > assigned-clocks = <&cru SCLK_MAC>; > assigned-clock-parents = <&ext_gmac>; > clock_in_out = "input"; > - phy-handle = <&phy0>; > phy-supply = <&vcc33_io>; > phy-mode = "rgmii"; > pinctrl-names = "default"; > @@ -161,22 +164,6 @@ > tx_delay = <0x10>; > rx_delay = <0x10>; > status = "okay"; > - > - mdio { > - compatible = "snps,dwmac-mdio"; > - #address-cells = <1>; > - #size-cells = <0>; > - > - /* Microsemi VSC8531-02 */ > - phy0: phy@0 { > - compatible = "ethernet-phy-id0007.0570"; > - reg = <0>; > - vsc8531,clk-out-frequency = <125000000>; > - vsc8531,edge-slowdown = <7>; > - vsc8531,led-0-mode = <1>; > - vsc8531,led-1-mode = <2>; > - }; > - }; > }; > > &i2c0 { > diff --git a/arch/arm/dts/rk3368-px5-evb.dts b/arch/arm/dts/rk3368-px5-evb.dts > index e9c5ebad47..5ccaa5f7a3 100644 > --- a/arch/arm/dts/rk3368-px5-evb.dts > +++ b/arch/arm/dts/rk3368-px5-evb.dts > @@ -1,43 +1,6 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > /* > - * Copyright (c) 2017 Rockchip Electronics Co., Ltd > - * > - * This file is dual-licensed: you can use it either under the terms > - * of the GPL or the X11 license, at your option. Note that this dual > - * licensing only applies to this file, and not this project as a > - * whole. > - * > - * a) This file is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; either version 2 of the > - * License, or (at your option) any later version. > - * > - * This file is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * Or, alternatively, > - * > - * b) Permission is hereby granted, free of charge, to any person > - * obtaining a copy of this software and associated documentation > - * files (the "Software"), to deal in the Software without > - * restriction, including without limitation the rights to use, > - * copy, modify, merge, publish, distribute, sublicense, and/or > - * sell copies of the Software, and to permit persons to whom the > - * Software is furnished to do so, subject to the following > - * conditions: > - * > - * The above copyright notice and this permission notice shall be > - * included in all copies or substantial portions of the Software. > - * > - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > - * OTHER DEALINGS IN THE SOFTWARE. > + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd > */ > > /dts-v1/; > @@ -45,30 +8,21 @@ > #include <dt-bindings/input/input.h> > > / { > - model = "PX5 EVB"; > + model = "Rockchip PX5 EVB"; > compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; > > + aliases { > + mmc0 = &sdmmc; > + mmc1 = &emmc; > + }; > + > chosen { > stdout-path = "serial4:115200n8"; > }; > > memory@0 { > - device_type = "memory"; > reg = <0x0 0x0 0x0 0x40000000>; > - }; > - > - ext_gmac: gmac-clk { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "ext_gmac"; > - #clock-cells = <0>; > - }; > - > - ir: ir-receiver { > - compatible = "gpio-ir-receiver"; > - gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&ir_int>; > + device_type = "memory"; > }; > > keys: gpio-keys { > @@ -77,29 +31,13 @@ > pinctrl-0 = <&pwr_key>; > > power { > - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; > + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; > label = "GPIO Power"; > linux,code = <KEY_POWER>; > wakeup-source; > }; > }; > > - leds: gpio-leds { > - compatible = "gpio-leds"; > - > - blue { > - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; > - label = "geekbox:blue:led"; > - default-state = "on"; > - }; > - > - red { > - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; > - label = "geekbox:red:led"; > - default-state = "off"; > - }; > - }; > - > vcc_sys: vcc-sys-regulator { > compatible = "regulator-fixed"; > regulator-name = "vcc_sys"; > @@ -115,27 +53,14 @@ > bus-width = <8>; > cap-mmc-highspeed; > clock-frequency = <150000000>; > - disable-wp; > - keep-power-in-suspend; > + mmc-hs200-1_8v; > + no-sdio; > + no-sd; > non-removable; > - num-slots = <1>; > - vmmc-supply = <&vcc_io>; > - vqmmc-supply = <&vcc18_flash>; > pinctrl-names = "default"; > pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; > -}; > - > -&gmac { > - status = "okay"; > - phy-supply = <&vcc_lan>; > - phy-mode = "rgmii"; > - clock_in_out = "input"; > - assigned-clocks = <&cru SCLK_MAC>; > - assigned-clock-parents = <&ext_gmac>; > - pinctrl-names = "default"; > - pinctrl-0 = <&rgmii_pins>; > - tx_delay = <0x30>; > - rx_delay = <0x10>; > + vmmc-supply = <&vcc_io>; > + vqmmc-supply = <&vcc18_flash>; > }; > > &i2c0 { > @@ -144,10 +69,10 @@ > rk808: pmic@1b { > compatible = "rockchip,rk808"; > reg = <0x1b>; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; > pinctrl-names = "default"; > pinctrl-0 = <&pmic_int>, <&pmic_sleep>; > - interrupt-parent = <&gpio0>; > - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; > rockchip,system-power-controller; > vcc1-supply = <&vcc_sys>; > vcc2-supply = <&vcc_sys>; > @@ -202,12 +127,12 @@ > regulator-name = "vcc18_flash"; > }; > > - vcc33_lcd: LDO_REG2 { > + vcca_33: LDO_REG2 { > regulator-always-on; > regulator-boot-on; > regulator-min-microvolt = <3300000>; > regulator-max-microvolt = <3300000>; > - regulator-name = "vcc33_lcd"; > + regulator-name = "vcca_33"; > }; > > vdd_10: LDO_REG3 { > @@ -218,11 +143,10 @@ > regulator-name = "vdd_10"; > }; > > - vcca_18: LDO_REG4 { > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-name = "vcca_18"; > + avdd_33: LDO_REG4 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "avdd_33"; > }; > > vccio_sd: LDO_REG5 { > @@ -258,46 +182,76 @@ > }; > > vcc_sd: SWITCH_REG1 { > - regulator-always-on; > - regulator-boot-on; > regulator-name = "vcc_sd"; > }; > > - vcc_lan: SWITCH_REG2 { > + vcc33_lcd: SWITCH_REG2 { > regulator-always-on; > regulator-boot-on; > - regulator-name = "vcc_lan"; > + regulator-name = "vcc33_lcd"; > }; > }; > }; > }; > > -&pinctrl { > - ir { > - ir_int: ir-int { > - rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > +&i2c1 { > + status = "okay"; > + > + accelerometer@18 { > + compatible = "bosch,bma250"; > + reg = <0x18>; > + interrupt-parent = <&gpio2>; > + interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>; > }; > +}; > > +&i2c2 { > + status = "okay"; > + > + gsl1680: touchscreen@40 { > + compatible = "silead,gsl1680"; > + reg = <0x40>; > + interrupt-parent = <&gpio3>; > + interrupts = <RK_PD4 IRQ_TYPE_EDGE_FALLING>; > + power-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; > + touchscreen-size-x = <800>; > + touchscreen-size-y = <1280>; > + silead,max-fingers = <5>; > + }; > +}; > + > +&pinctrl { > keys { > pwr_key: pwr-key { > - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO > &pcfg_pull_none>; > }; > }; > > pmic { > pmic_sleep: pmic-sleep { > - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; > + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; > }; > > pmic_int: pmic-int { > - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > }; > }; > }; > > -&saradc { > +&sdmmc { > status = "okay"; > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + card-detect-delay = <200>; > + no-sdio; > + sd-uhs-sdr12; > + sd-uhs-sdr25; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_bus4>, <&sdmmc_cd>; > + rockchip,default-sample-phase = <90>; > + vmmc-supply = <&vcc_sd>; > + vqmmc-supply = <&vccio_sd>; > }; > > &tsadc { > diff --git a/arch/arm/dts/rk3368.dtsi b/arch/arm/dts/rk3368.dtsi > index cd2c322071..4c64fbefb4 100644 > --- a/arch/arm/dts/rk3368.dtsi > +++ b/arch/arm/dts/rk3368.dtsi > @@ -136,37 +136,6 @@ > }; > }; > > - amba: bus { > - compatible = "simple-bus"; > - #address-cells = <2>; > - #size-cells = <2>; > - ranges; > - > - dmac_peri: dma-controller@ff250000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x0 0xff250000 0x0 0x4000>; > - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; > - #dma-cells = <1>; > - arm,pl330-broken-no-flushp; > - arm,pl330-periph-burst; > - clocks = <&cru ACLK_DMAC_PERI>; > - clock-names = "apb_pclk"; > - }; > - > - dmac_bus: dma-controller@ff600000 { > - compatible = "arm,pl330", "arm,primecell"; > - reg = <0x0 0xff600000 0x0 0x4000>; > - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; > - #dma-cells = <1>; > - arm,pl330-broken-no-flushp; > - arm,pl330-periph-burst; > - clocks = <&cru ACLK_DMAC_BUS>; > - clock-names = "apb_pclk"; > - }; > - }; > - > arm-pmu { > compatible = "arm,armv8-pmuv3"; > interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, > @@ -399,8 +368,20 @@ > status = "disabled"; > }; > > + dmac_peri: dma-controller@ff250000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x0 0xff250000 0x0 0x4000>; > + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <1>; > + arm,pl330-broken-no-flushp; > + arm,pl330-periph-burst; > + clocks = <&cru ACLK_DMAC_PERI>; > + clock-names = "apb_pclk"; > + }; > + > thermal-zones { > - cpu { > + cpu_thermal: cpu-thermal { > polling-delay-passive = <100>; /* milliseconds */ > polling-delay = <5000>; /* milliseconds */ > > @@ -444,7 +425,7 @@ > }; > }; > > - gpu { > + gpu_thermal: gpu-thermal { > polling-delay-passive = <100>; /* milliseconds */ > polling-delay = <5000>; /* milliseconds */ > > @@ -532,6 +513,18 @@ > status = "disabled"; > }; > > + dmac_bus: dma-controller@ff600000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x0 0xff600000 0x0 0x4000>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <1>; > + arm,pl330-broken-no-flushp; > + arm,pl330-periph-burst; > + clocks = <&cru ACLK_DMAC_BUS>; > + clock-names = "apb_pclk"; > + }; > + > i2c0: i2c@ff650000 { > compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; > reg = <0x0 0xff650000 0x0 0x1000>; > @@ -565,7 +558,6 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pwm0_pin>; > clocks = <&cru PCLK_PWM1>; > - clock-names = "pwm"; > status = "disabled"; > }; > > @@ -576,7 +568,6 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pwm1_pin>; > clocks = <&cru PCLK_PWM1>; > - clock-names = "pwm"; > status = "disabled"; > }; > > @@ -585,7 +576,6 @@ > reg = <0x0 0xff680020 0x0 0x10>; > #pwm-cells = <3>; > clocks = <&cru PCLK_PWM1>; > - clock-names = "pwm"; > status = "disabled"; > }; > > @@ -596,7 +586,6 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pwm3_pin>; > clocks = <&cru PCLK_PWM1>; > - clock-names = "pwm"; > status = "disabled"; > }; > > @@ -675,6 +664,8 @@ > compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer"; > reg = <0x0 0xff810000 0x0 0x20>; > interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>; > + clock-names = "pclk", "timer"; > }; > > spdif: spdif@ff880000 { > -- > 2.31.1 >
