There are two versaclock programmable clock chips used to provide reference clocks for both USB and Ethernet. Enable the driver in the configs to run these clocks.
Signed-off-by: Adam Ford <[email protected]> --- V2: Move from defconfig to kconfig diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64 index a6dcce180b..c90ea06692 100644 --- a/arch/arm/mach-rmobile/Kconfig.64 +++ b/arch/arm/mach-rmobile/Kconfig.64 @@ -76,18 +76,24 @@ config TARGET_BEACON_RZG2H select R8A774E1 select RZ_G2 select PINCTRL_PFC_R8A774E1 + select CLK_CCF + select CLK_VERSACLOCK config TARGET_BEACON_RZG2M bool "Beacon EmbeddedWorks RZ/G2M Dev Kit" select R8A774A1 select RZ_G2 select PINCTRL_PFC_R8A774A1 + select CLK_CCF + select CLK_VERSACLOCK config TARGET_BEACON_RZG2N bool "Beacon EmbeddedWorks RZ/G2N Dev Kit" select R8A774B1 select RZ_G2 select PINCTRL_PFC_R8A774B1 + select CLK_CCF + select CLK_VERSACLOCK config TARGET_CONDOR bool "Condor board" -- 2.25.1
