On Tue, Aug 24, 2021 at 1:41 PM Adam Ford <[email protected]> wrote: > > There are two versaclock programmable clock chips used to provide > reference clocks for both USB and Ethernet. Enable the driver > in the configs to run these clocks. > > Signed-off-by: Adam Ford <[email protected]> > ---
Go ahead and drop this now. I have FIT working with multiple DTB's from one config file. I'll push a new series to unify M/N/H boards into one defconfig, then add new the functions to the one remaining board. That should eliminate a lot of duplicated entries. adam > V2: Move from defconfig to kconfig > > diff --git a/arch/arm/mach-rmobile/Kconfig.64 > b/arch/arm/mach-rmobile/Kconfig.64 > index a6dcce180b..c90ea06692 100644 > --- a/arch/arm/mach-rmobile/Kconfig.64 > +++ b/arch/arm/mach-rmobile/Kconfig.64 > @@ -76,18 +76,24 @@ config TARGET_BEACON_RZG2H > select R8A774E1 > select RZ_G2 > select PINCTRL_PFC_R8A774E1 > + select CLK_CCF > + select CLK_VERSACLOCK > > config TARGET_BEACON_RZG2M > bool "Beacon EmbeddedWorks RZ/G2M Dev Kit" > select R8A774A1 > select RZ_G2 > select PINCTRL_PFC_R8A774A1 > + select CLK_CCF > + select CLK_VERSACLOCK > > config TARGET_BEACON_RZG2N > bool "Beacon EmbeddedWorks RZ/G2N Dev Kit" > select R8A774B1 > select RZ_G2 > select PINCTRL_PFC_R8A774B1 > + select CLK_CCF > + select CLK_VERSACLOCK > > config TARGET_CONDOR > bool "Condor board" > -- > 2.25.1 >
