Rather than using CONFIG_SABRELITE to set FDTFILE for only that platform, switch to always setting this based on CONFIG_DEFAULT_DEVICE_TREE as this should always match the kernel device tree name anyhow.
Cc: Troy Kisky <[email protected]> Signed-off-by: Tom Rini <[email protected]> --- configs/mx6qsabrelite_defconfig | 1 - include/configs/nitrogen6x.h | 10 +--------- 2 files changed, 1 insertion(+), 10 deletions(-) diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig index 9f0882e932f4..b496df8a4dac 100644 --- a/configs/mx6qsabrelite_defconfig +++ b/configs/mx6qsabrelite_defconfig @@ -16,7 +16,6 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabrelite" CONFIG_CMD_HDMIDETECT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="SABRELITE" CONFIG_BOOTDELAY=3 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_USE_PREBOOT=y diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 0c407503517d..1a0d970de716 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -90,14 +90,6 @@ #define DISTRO_BOOT_DEV_DHCP(func) #endif - -#if defined(CONFIG_SABRELITE) -#define FDTFILE "fdtfile=imx6q-sabrelite.dtb\0" -#else -/* FIXME: nitrogen6x covers multiple configs. Define fdtfile for each supported config. */ -#define FDTFILE -#endif - #define BOOT_TARGET_DEVICES(func) \ DISTRO_BOOT_DEV_MMC(func) \ DISTRO_BOOT_DEV_SATA(func) \ @@ -113,7 +105,7 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "fdt_addr_r=0x18000000\0" \ - FDTFILE \ + "fdtfile=" __stringify(CONFIG_DEFAULT_DEVICE_TREE) ".dtb\0" \ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ -- 2.17.1
