Le 02/11/2010 06:58, V, Aneesh a écrit : > Hi Heiko, > >> -----Original Message----- >> From: u-boot-boun...@lists.denx.de [mailto:u-boot- >> boun...@lists.denx.de] On Behalf Of V, Aneesh >> Sent: Tuesday, November 02, 2010 11:10 AM >> To: h...@denx.de; Alexander Holler >> Cc: Darius Augulis; u-boot@lists.denx.de >> Subject: Re: [U-Boot] arm: wrong Relocation and not cleared BSS >> >> >> Assembly listing: >> ***************** >> 80e8017c<_board_init_r_ofs>: >> 80e8017c: 00000748 .word 0x00000748 >> >> 80e80180<_rel_dyn_start_ofs>: >> 80e80180: 0002358c .word 0x0002358c >> >> 80e80184<_rel_dyn_end_ofs>: >> 80e80184: 0002358c .word 0x0002358c >> >> 80e80188<_dynsym_start_ofs>: >> 80e80188: 0002358c .word 0x0002358c >> > > I don't know if this was clear in the previous mail. Please note that > last three labels have same value. > > Best regards, > Aneesh
Aneesh, This has been seen on tx25 and analyzed over the last few days. The root cause was found to be a change in the .rel.dyn handling by the compilers. See if the fixes in <http://article.gmane.org/gmane.comp.boot-loaders.u-boot/88156> <http://article.gmane.org/gmane.comp.boot-loaders.u-boot/88157> <http://article.gmane.org/gmane.comp.boot-loaders.u-boot/88158> can apply to your board; either the .lds fix as done in the first two patches, or the fix in the third one, or both. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
