Le 02/11/2010 09:53, V, Aneesh a écrit : > My .rel.dyn was not empty even before taking your fix. > > This is what puzzled me. When I dumped the ELF headers with 'objdump -h' > ..rel.dyn seemed to have some content: Please see the diff of objdump's > output before and after applying your patch. > > Please note that .rel.dyn was there even without the patch having the > same size but at a different offset. > > So, this is what it looks like to me: > Even when our rule in .lds was not correct the linker generated > ..rel.dyn section by default putting together the 'rel*' sections that > were not covered by any rules. But since it didn't use our rule for > this, the labels associated with our rule indicated zero size.
Correct: the linker dumped the ununsed .rel* input sections so you can see them, but they were outside of _rel_dyn_start / _rel_dyn_end, so for all useful purposes, we can say that .rel.dyn was empty. What was not empty was some other place in the binary that was not .rel.dyn as such. > We did not face the second issue because we are loading the entire > u-boot.bin using a separate preloader. Ok. > Best regards, > Aneesh Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
