Import Amlogic DT changes from Linux commit 7d2a07b76933 ("Linux 5.14"),
dt-bindings clock changes and new meson-g12b-gsking-x.dts,
meson-sm1-bananapi-m5 & odroid-hc4 boards.
Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
arch/arm/dts/Makefile | 3 +
arch/arm/dts/meson-axg-s400.dts | 16 +
arch/arm/dts/meson-axg.dtsi | 181 +++++
arch/arm/dts/meson-g12-common.dtsi | 31 +-
arch/arm/dts/meson-g12a-sei510.dts | 2 +-
arch/arm/dts/meson-g12b-gsking-x.dts | 133 ++++
arch/arm/dts/meson-g12b-gtking-pro.dts | 23 +-
arch/arm/dts/meson-g12b-gtking.dts | 22 +-
arch/arm/dts/meson-g12b-odroid-n2-plus.dts | 2 +-
arch/arm/dts/meson-g12b-odroid-n2.dtsi | 74 +-
arch/arm/dts/meson-g12b-w400.dtsi | 2 +-
arch/arm/dts/meson-g12b.dtsi | 4 +
arch/arm/dts/meson-gx-libretech-pc.dtsi | 2 +-
arch/arm/dts/meson-gx-p23x-q20x.dtsi | 2 +-
arch/arm/dts/meson-gx.dtsi | 7 +
arch/arm/dts/meson-gxbb-nanopi-k2.dts | 42 +-
arch/arm/dts/meson-gxbb-odroidc2.dts | 44 +-
arch/arm/dts/meson-gxl-s805x-libretech-ac.dts | 2 +-
arch/arm/dts/meson-gxl-s905x-khadas-vim.dts | 50 +-
.../dts/meson-gxl-s905x-libretech-cc-v2.dts | 6 +-
arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 2 +-
arch/arm/dts/meson-gxm-khadas-vim2.dts | 55 +-
arch/arm/dts/meson-gxm-wetek-core2.dts | 2 +-
arch/arm/dts/meson-gxm.dtsi | 20 +
arch/arm/dts/meson-khadas-vim3.dtsi | 73 +-
arch/arm/dts/meson-sm1-bananapi-m5.dts | 646 ++++++++++++++++++
arch/arm/dts/meson-sm1-khadas-vim3l.dts | 20 +-
arch/arm/dts/meson-sm1-odroid-c4.dts | 448 +-----------
arch/arm/dts/meson-sm1-odroid-hc4.dts | 140 ++++
arch/arm/dts/meson-sm1-odroid.dtsi | 449 ++++++++++++
arch/arm/dts/meson-sm1-sei610.dts | 10 +-
arch/arm/dts/meson-sm1.dtsi | 12 +-
include/dt-bindings/clock/axg-clkc.h | 26 +-
include/dt-bindings/clock/g12a-clkc.h | 2 +
34 files changed, 2030 insertions(+), 523 deletions(-)
create mode 100644 arch/arm/dts/meson-g12b-gsking-x.dts
create mode 100644 arch/arm/dts/meson-sm1-bananapi-m5.dts
create mode 100644 arch/arm/dts/meson-sm1-odroid-hc4.dts
create mode 100644 arch/arm/dts/meson-sm1-odroid.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index fc16a57e60..f0160d2dc0 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -177,11 +177,14 @@ dtb-$(CONFIG_ARCH_MESON) += \
meson-g12a-sei510.dtb \
meson-g12b-gtking.dtb \
meson-g12b-gtking-pro.dtb \
+ meson-g12b-gsking-x.dtb \
meson-g12b-odroid-n2.dtb \
meson-g12b-odroid-n2-plus.dtb \
meson-g12b-a311d-khadas-vim3.dtb \
+ meson-sm1-bananapi-m5.dtb \
meson-sm1-khadas-vim3l.dtb \
meson-sm1-odroid-c4.dtb \
+ meson-sm1-odroid-hc4.dtb \
meson-sm1-sei610.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
diff --git a/arch/arm/dts/meson-axg-s400.dts b/arch/arm/dts/meson-axg-s400.dts
index cb1360ae12..359589d1df 100644
--- a/arch/arm/dts/meson-axg-s400.dts
+++ b/arch/arm/dts/meson-axg-s400.dts
@@ -441,6 +441,16 @@
status = "okay";
};
+&pcieA {
+ reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pcieB {
+ reset-gpios = <&gpio GPIOZ_10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
&pwm_ab {
status = "okay";
pinctrl-0 = <&pwm_a_x20_pins>;
@@ -584,3 +594,9 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb {
+ status = "okay";
+ dr_mode = "otg";
+ vbus-supply = <&usb_pwr>;
+};
diff --git a/arch/arm/dts/meson-axg.dtsi b/arch/arm/dts/meson-axg.dtsi
index b9efc84692..3f5254eeb4 100644
--- a/arch/arm/dts/meson-axg.dtsi
+++ b/arch/arm/dts/meson-axg.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+#include <dt-bindings/power/meson-axg-power.h>
/ {
compatible = "amlogic,meson-axg";
@@ -171,6 +172,98 @@
#size-cells = <2>;
ranges;
+ pcieA: pcie@f9800000 {
+ compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+ reg = <0x0 0xf9800000 0x0 0x400000>,
+ <0x0 0xff646000 0x0 0x2000>,
+ <0x0 0xf9f00000 0x0 0x100000>;
+ reg-names = "elbi", "cfg", "config";
+ interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 179
IRQ_TYPE_EDGE_RISING>;
+ bus-range = <0x0 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x82000000 0 0xf9c00000 0x0 0xf9c00000 0
0x00300000>;
+
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_A>,
<&clkc CLKID_PCIE_CML_EN0>;
+ clock-names = "general", "pclk", "port";
+ resets = <&reset RESET_PCIE_A>, <&reset RESET_PCIE_APB>;
+ reset-names = "port", "apb";
+ num-lanes = <1>;
+ phys = <&pcie_phy>;
+ phy-names = "pcie";
+ status = "disabled";
+ };
+
+ pcieB: pcie@fa000000 {
+ compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+ reg = <0x0 0xfa000000 0x0 0x400000>,
+ <0x0 0xff648000 0x0 0x2000>,
+ <0x0 0xfa400000 0x0 0x100000>;
+ reg-names = "elbi", "cfg", "config";
+ interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 169
IRQ_TYPE_EDGE_RISING>;
+ bus-range = <0x0 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x82000000 0 0xfa500000 0x0 0xfa500000 0
0x00300000>;
+
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_B>,
<&clkc CLKID_PCIE_CML_EN1>;
+ clock-names = "general", "pclk", "port";
+ resets = <&reset RESET_PCIE_B>, <&reset RESET_PCIE_APB>;
+ reset-names = "port", "apb";
+ num-lanes = <1>;
+ phys = <&pcie_phy>;
+ phy-names = "pcie";
+ status = "disabled";
+ };
+
+ usb: usb@ffe09080 {
+ compatible = "amlogic,meson-axg-usb-ctrl";
+ reg = <0x0 0xffe09080 0x0 0x20>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&clkc CLKID_USB>, <&clkc
CLKID_USB1_DDR_BRIDGE>;
+ clock-names = "usb_ctrl", "ddr";
+ resets = <&reset RESET_USB_OTG>;
+
+ dr_mode = "otg";
+
+ phys = <&usb2_phy1>;
+ phy-names = "usb2-phy1";
+
+ dwc2: usb@ff400000 {
+ compatible = "amlogic,meson-g12a-usb",
"snps,dwc2";
+ reg = <0x0 0xff400000 0x0 0x40000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_USB1>;
+ clock-names = "otg";
+ phys = <&usb2_phy1>;
+ dr_mode = "peripheral";
+ g-rx-fifo-size = <192>;
+ g-np-tx-fifo-size = <128>;
+ g-tx-fifo-size = <128 128 16 16 16>;
+ };
+
+ dwc3: usb@ff500000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff500000 0x0 0x100000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+ snps,dis_u2_susphy_quirk;
+ };
+ };
+
ethmac: ethernet@ff3f0000 {
compatible = "amlogic,meson-axg-dwmac",
"snps,dwmac-3.70a",
@@ -187,9 +280,19 @@
"timing-adjustment";
rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>;
+ power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>;
status = "disabled";
};
+ pcie_phy: phy@ff644000 {
+ compatible = "amlogic,axg-pcie-phy";
+ reg = <0x0 0xff644000 0x0 0x1c>;
+ resets = <&reset RESET_PCIE_PHY>;
+ phys = <&mipi_pcie_analog_dphy>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ };
+
pdm: audio-controller@ff632000 {
compatible = "amlogic,axg-pdm";
reg = <0x0 0xff632000 0x0 0x34>;
@@ -1117,6 +1220,52 @@
clocks = <&xtal>;
clock-names = "xtal";
};
+
+ pwrc: power-controller {
+ compatible = "amlogic,meson-axg-pwrc";
+ #power-domain-cells = <1>;
+ amlogic,ao-sysctrl = <&sysctrl_AO>;
+ resets = <&reset RESET_VIU>,
+ <&reset RESET_VENC>,
+ <&reset RESET_VCBUS>,
+ <&reset RESET_VENCL>,
+ <&reset RESET_VID_LOCK>;
+ reset-names = "viu", "venc", "vcbus",
+ "vencl", "vid_lock";
+ clocks = <&clkc CLKID_VPU>,
+ <&clkc CLKID_VAPB>;
+ clock-names = "vpu", "vapb";
+ /*
+ * VPU clocking is provided by two
identical clock paths
+ * VPU_0 and VPU_1 muxed to a single
clock by a glitch
+ * free mux to safely change frequency
while running.
+ * Same for VAPB but with a final gate
after the glitch free mux.
+ */
+ assigned-clocks = <&clkc
CLKID_VPU_0_SEL>,
+ <&clkc CLKID_VPU_0>,
+ <&clkc CLKID_VPU>, /*
Glitch free mux */
+ <&clkc
CLKID_VAPB_0_SEL>,
+ <&clkc CLKID_VAPB_0>,
+ <&clkc
CLKID_VAPB_SEL>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc
CLKID_FCLK_DIV4>,
+ <0>, /* Do
Nothing */
+ <&clkc
CLKID_VPU_0>,
+ <&clkc
CLKID_FCLK_DIV4>,
+ <0>, /* Do
Nothing */
+ <&clkc
CLKID_VAPB_0>;
+ assigned-clock-rates = <0>, /* Do
Nothing */
+ <250000000>,
+ <0>, /* Do
Nothing */
+ <0>, /* Do
Nothing */
+ <250000000>,
+ <0>; /* Do
Nothing */
+ };
+
+ mipi_pcie_analog_dphy: phy {
+ compatible =
"amlogic,axg-mipi-pcie-analog-phy";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
};
@@ -1129,6 +1278,19 @@
#mbox-cells = <1>;
};
+ mipi_dphy: phy@ff640000 {
+ compatible = "amlogic,axg-mipi-dphy";
+ reg = <0x0 0xff640000 0x0 0x100>;
+ clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+ clock-names = "pclk";
+ resets = <&reset RESET_MIPI_PHY>;
+ reset-names = "phy";
+ phys = <&mipi_pcie_analog_dphy>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
audio: bus@ff642000 {
compatible = "simple-bus";
reg = <0x0 0xff642000 0x0 0x2000>;
@@ -1563,6 +1725,14 @@
};
};
+ ge2d: ge2d@ff940000 {
+ compatible = "amlogic,axg-ge2d";
+ reg = <0x0 0xff940000 0x0 0x10000>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_VAPB>;
+ resets = <&reset RESET_GE2D>;
+ };
+
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
reg = <0x0 0xffc01000 0 0x1000>,
@@ -1701,6 +1871,7 @@
status = "disabled";
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
+ fifo-size = <128>;
};
};
@@ -1734,6 +1905,16 @@
clock-names = "core", "clkin0", "clkin1";
resets = <&reset RESET_SD_EMMC_C>;
};
+
+ usb2_phy1: phy@9020 {
+ compatible = "amlogic,meson-gxl-usb2-phy";
+ #phy-cells = <0>;
+ reg = <0x0 0x9020 0x0 0x20>;
+ clocks = <&clkc CLKID_USB>;
+ clock-names = "phy";
+ resets = <&reset RESET_USB_OTG>;
+ reset-names = "phy";
+ };
};
sram: sram@fffc0000 {
diff --git a/arch/arm/dts/meson-g12-common.dtsi
b/arch/arm/dts/meson-g12-common.dtsi
index 1e83ec5b8c..00c6f53290 100644
--- a/arch/arm/dts/meson-g12-common.dtsi
+++ b/arch/arm/dts/meson-g12-common.dtsi
@@ -17,6 +17,12 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ mmc0 = &sd_emmc_b; /* SD card */
+ mmc1 = &sd_emmc_c; /* eMMC */
+ mmc2 = &sd_emmc_a; /* SDIO */
+ };
+
chosen {
#address-cells = <2>;
#size-cells = <2>;
@@ -122,9 +128,9 @@
pcie: pcie@fc000000 {
compatible = "amlogic,g12a-pcie", "snps,dw-pcie";
- reg = <0x0 0xfc000000 0x0 0x400000
- 0x0 0xff648000 0x0 0x2000
- 0x0 0xfc400000 0x0 0x200000>;
+ reg = <0x0 0xfc000000 0x0 0x400000>,
+ <0x0 0xff648000 0x0 0x2000>,
+ <0x0 0xfc400000 0x0 0x200000>;
reg-names = "elbi", "cfg", "config";
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
@@ -134,8 +140,8 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000
- 0x82000000 0 0xfc700000 0x0 0xfc700000 0
0x1900000>;
+ ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>,
+ <0x82000000 0 0xfc700000 0x0 0xfc700000 0
0x1900000>;
clocks = <&clkc CLKID_PCIE_PHY
&clkc CLKID_PCIE_COMB
@@ -209,7 +215,7 @@
};
ethmac: ethernet@ff3f0000 {
- compatible = "amlogic,meson-axg-dwmac",
+ compatible = "amlogic,meson-g12a-dwmac",
"snps,dwmac-3.70a",
"snps,dwmac";
reg = <0x0 0xff3f0000 0x0 0x10000>,
@@ -282,6 +288,8 @@
hwrng: rng@218 {
compatible = "amlogic,meson-rng";
reg = <0x0 0x218 0x0 0x4>;
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
};
};
@@ -2001,7 +2009,7 @@
};
};
- vrtc: rtc@0a8 {
+ vrtc: rtc@a8 {
compatible = "amlogic,meson-vrtc";
reg = <0x0 0x000a8 0x0 0x4>;
};
@@ -2179,6 +2187,12 @@
amlogic,channel-interrupts = <64 65 66 67 68 69
70 71>;
};
+ watchdog: watchdog@f0d0 {
+ compatible = "amlogic,meson-gxbb-wdt";
+ reg = <0x0 0xf0d0 0x0 0x10>;
+ clocks = <&xtal>;
+ };
+
spicc0: spi@13000 {
compatible = "amlogic,meson-g12a-spicc";
reg = <0x0 0x13000 0x0 0x44>;
@@ -2303,6 +2317,7 @@
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
+ fifo-size = <128>;
};
};
@@ -2380,7 +2395,7 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,dis_u2_susphy_quirk;
- snps,quirk-frame-length-adjustment;
+ snps,quirk-frame-length-adjustment = <0x20>;
snps,parkmode-disable-ss-quirk;
};
};
diff --git a/arch/arm/dts/meson-g12a-sei510.dts
b/arch/arm/dts/meson-g12a-sei510.dts
index b00d0468c7..81269ccc24 100644
--- a/arch/arm/dts/meson-g12a-sei510.dts
+++ b/arch/arm/dts/meson-g12a-sei510.dts
@@ -181,7 +181,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12A-SEI510";
+ model = "SEI510";
audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
<&tdmin_a>, <&tdmin_b>;
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
diff --git a/arch/arm/dts/meson-g12b-gsking-x.dts
b/arch/arm/dts/meson-g12b-gsking-x.dts
new file mode 100644
index 0000000000..6c7bfacbad
--- /dev/null
+++ b/arch/arm/dts/meson-g12b-gsking-x.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstr...@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshew...@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "azw,gsking-x", "amlogic,s922x", "amlogic,g12b";
+ model = "Beelink GS-King X";
+
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ power-button {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "GSKING-X";
+ audio-aux-devs = <&tdmout_a>;
+ audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_A IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_A IN 2", "FRDDR_C OUT 1",
+ "TDM_A Playback", "TDMOUT_A OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_a>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+ };
+ };
+
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
+&tdmif_a {
+ status = "okay";
+};
+
+&tdmout_a {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
diff --git a/arch/arm/dts/meson-g12b-gtking-pro.dts
b/arch/arm/dts/meson-g12b-gtking-pro.dts
index f0c56a16af..707daf9278 100644
--- a/arch/arm/dts/meson-g12b-gtking-pro.dts
+++ b/arch/arm/dts/meson-g12b-gtking-pro.dts
@@ -11,9 +11,14 @@
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
- compatible = "azw,gtking", "amlogic,g12b";
+ compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b";
model = "Beelink GT-King Pro";
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
+ };
+
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -30,7 +35,7 @@
leds {
compatible = "gpio-leds";
- white {
+ led-white {
label = "power:white";
gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -39,7 +44,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12B-GTKING-PRO";
+ model = "GTKING-PRO";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
@@ -112,6 +117,18 @@
status = "okay";
};
+&i2c3 {
+ status = "okay";
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
&tdmif_b {
status = "okay";
};
diff --git a/arch/arm/dts/meson-g12b-gtking.dts
b/arch/arm/dts/meson-g12b-gtking.dts
index eeb7bc5539..5d96c14490 100644
--- a/arch/arm/dts/meson-g12b-gtking.dts
+++ b/arch/arm/dts/meson-g12b-gtking.dts
@@ -11,9 +11,14 @@
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
- compatible = "azw,gtking", "amlogic,g12b";
+ compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b";
model = "Beelink GT-King";
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
+ };
+
spdif_dit: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
@@ -23,7 +28,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12B-GTKING";
+ model = "GTKING";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
@@ -122,6 +127,19 @@
status = "okay";
};
+
+&i2c3 {
+ status = "okay";
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
&spdifout {
pinctrl-0 = <&spdif_out_h_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/dts/meson-g12b-odroid-n2-plus.dts
b/arch/arm/dts/meson-g12b-odroid-n2-plus.dts
index 5de2815ba9..ce1198ad34 100644
--- a/arch/arm/dts/meson-g12b-odroid-n2-plus.dts
+++ b/arch/arm/dts/meson-g12b-odroid-n2-plus.dts
@@ -19,7 +19,7 @@
regulator-min-microvolt = <680000>;
regulator-max-microvolt = <1040000>;
- pwms = <&pwm_AO_cd 1 1500 0>;
+ pwms = <&pwm_ab 0 1500 0>;
};
&vddcpu_b {
diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dtsi
b/arch/arm/dts/meson-g12b-odroid-n2.dtsi
index 6982632ae6..344573e157 100644
--- a/arch/arm/dts/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm/dts/meson-g12b-odroid-n2.dtsi
@@ -13,6 +13,8 @@
aliases {
serial0 = &uart_AO;
ethernet0 = ðmac;
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
};
dioo2133: audio-amplifier-0 {
@@ -40,7 +42,7 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-blue {
label = "n2:blue";
gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -211,7 +213,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12B-ODROID-N2";
+ model = "ODROID-N2";
audio-widgets = "Line", "Lineout";
audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
<&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
@@ -408,12 +410,12 @@
&ext_mdio {
external_phy: ethernet-phy@0 {
- /* Realtek RTL8211F (0x001cc916) */
+ /* Realtek RTL8211F (0x001cc916) */
reg = <0>;
max-speed = <1000>;
reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
+ reset-deassert-us = <80000>;
reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW |
GPIO_OPEN_DRAIN)>;
interrupt-parent = <&gpio_intc>;
@@ -444,13 +446,58 @@
};
&gpio {
+ gpio-line-names =
+ /* GPIOZ */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* GPIOH */
+ "", "", "", "", "", "", "", "",
+ "",
+ /* BOOT */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* GPIOC */
+ "", "", "", "", "", "", "", "",
+ /* GPIOA */
+ "PIN_44", /* GPIOA_0 */
+ "PIN_46", /* GPIOA_1 */
+ "PIN_45", /* GPIOA_2 */
+ "PIN_47", /* GPIOA_3 */
+ "PIN_26", /* GPIOA_4 */
+ "", "", "", "", "", "",
+ "PIN_42", /* GPIOA_11 */
+ "PIN_32", /* GPIOA_12 */
+ "PIN_7", /* GPIOA_13 */
+ "PIN_27", /* GPIOA_14 */
+ "PIN_28", /* GPIOA_15 */
+ /* GPIOX */
+ "PIN_16", /* GPIOX_0 */
+ "PIN_18", /* GPIOX_1 */
+ "PIN_22", /* GPIOX_2 */
+ "PIN_11", /* GPIOX_3 */
+ "PIN_13", /* GPIOX_4 */
+ "PIN_33", /* GPIOX_5 */
+ "PIN_35", /* GPIOX_6 */
+ "PIN_15", /* GPIOX_7 */
+ "PIN_19", /* GPIOX_8 */
+ "PIN_21", /* GPIOX_9 */
+ "PIN_24", /* GPIOX_10 */
+ "PIN_23", /* GPIOX_11 */
+ "PIN_8", /* GPIOX_12 */
+ "PIN_10", /* GPIOX_13 */
+ "PIN_29", /* GPIOX_14 */
+ "PIN_31", /* GPIOX_15 */
+ "PIN_12", /* GPIOX_16 */
+ "PIN_3", /* GPIOX_17 */
+ "PIN_5", /* GPIOX_18 */
+ "PIN_36"; /* GPIOX_19 */
/*
* WARNING: The USB Hub on the Odroid-N2 needs a reset signal
* to be turned high in order to be detected by the USB Controller
* This signal should be handled by a USB specific power sequence
* in order to reset the Hub when USB bus is powered down.
*/
- usb-hub {
+ hog-0 {
gpio-hog;
gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -478,6 +525,18 @@
linux,rc-map-name = "rc-odroid";
};
+&i2c3 {
+ status = "okay";
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
&pwm_ab {
pinctrl-0 = <&pwm_a_e_pins>;
pinctrl-names = "default";
@@ -494,6 +553,11 @@
status = "okay";
};
+&saradc {
+ status = "okay";
+ vref-supply = <&vddao_1v8>;
+};
+
/* SD card */
&sd_emmc_b {
status = "okay";
diff --git a/arch/arm/dts/meson-g12b-w400.dtsi
b/arch/arm/dts/meson-g12b-w400.dtsi
index 2802ddbb83..feb0885047 100644
--- a/arch/arm/dts/meson-g12b-w400.dtsi
+++ b/arch/arm/dts/meson-g12b-w400.dtsi
@@ -264,7 +264,7 @@
max-speed = <1000>;
reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
+ reset-deassert-us = <80000>;
reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW |
GPIO_OPEN_DRAIN)>;
interrupt-parent = <&gpio_intc>;
diff --git a/arch/arm/dts/meson-g12b.dtsi b/arch/arm/dts/meson-g12b.dtsi
index 9b8548e5f6..ee8fcae9f9 100644
--- a/arch/arm/dts/meson-g12b.dtsi
+++ b/arch/arm/dts/meson-g12b.dtsi
@@ -135,3 +135,7 @@
};
};
};
+
+&mali {
+ dma-coherent;
+};
diff --git a/arch/arm/dts/meson-gx-libretech-pc.dtsi
b/arch/arm/dts/meson-gx-libretech-pc.dtsi
index c2480bab8d..2d7032f41e 100644
--- a/arch/arm/dts/meson-gx-libretech-pc.dtsi
+++ b/arch/arm/dts/meson-gx-libretech-pc.dtsi
@@ -186,7 +186,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXL-LIBRETECH-S9XX-PC";
+ model = "LIBRETECH-PC";
audio-aux-devs = <&dio2133>;
audio-widgets = "Speaker", "7J4-14 LEFT",
"Speaker", "7J4-11 RIGHT";
diff --git a/arch/arm/dts/meson-gx-p23x-q20x.dtsi
b/arch/arm/dts/meson-gx-p23x-q20x.dtsi
index 6b57e15aad..dafc841f7c 100644
--- a/arch/arm/dts/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm/dts/meson-gx-p23x-q20x.dtsi
@@ -121,7 +121,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GX-P230-Q200";
+ model = "P230-Q200";
audio-aux-devs = <&dio2133>;
audio-widgets = "Line", "Lineout";
audio-routing = "AU2 INL", "ACODEC LOLP",
diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi
index 0edd137151..6b457b2c30 100644
--- a/arch/arm/dts/meson-gx.dtsi
+++ b/arch/arm/dts/meson-gx.dtsi
@@ -20,6 +20,12 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ mmc0 = &sd_emmc_b; /* SD card */
+ mmc1 = &sd_emmc_c; /* eMMC */
+ mmc2 = &sd_emmc_a; /* SDIO */
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -295,6 +301,7 @@
reg = <0x0 0x84c0 0x0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
+ fifo-size = <128>;
};
uart_B: serial@84dc {
diff --git a/arch/arm/dts/meson-gxbb-nanopi-k2.dts
b/arch/arm/dts/meson-gxbb-nanopi-k2.dts
index 7be3e35409..7273eed529 100644
--- a/arch/arm/dts/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm/dts/meson-gxbb-nanopi-k2.dts
@@ -7,6 +7,7 @@
#include "meson-gxbb.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/meson-aiu.h>
/ {
compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
@@ -130,6 +131,45 @@
};
};
};
+
+ sound {
+ compatible = "amlogic,gx-sound-card";
+ model = "NANOPI-K2";
+ assigned-clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+ dai-format = "i2s";
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+ };
+ };
+
+ dai-link-2 {
+ sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&aiu {
+ status = "okay";
};
&cec_AO {
@@ -165,7 +205,7 @@
reg = <0>;
reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
+ reset-deassert-us = <80000>;
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts
b/arch/arm/dts/meson-gxbb-odroidc2.dts
index 70fcfb7b06..201596247f 100644
--- a/arch/arm/dts/meson-gxbb-odroidc2.dts
+++ b/arch/arm/dts/meson-gxbb-odroidc2.dts
@@ -9,6 +9,7 @@
#include "meson-gxbb.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/meson-aiu.h>
/ {
compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
@@ -172,6 +173,45 @@
};
};
};
+
+ sound {
+ compatible = "amlogic,gx-sound-card";
+ model = "ODROID-C2";
+ assigned-clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+ dai-format = "i2s";
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+ };
+ };
+
+ dai-link-2 {
+ sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&aiu {
+ status = "okay";
};
&cec_AO {
@@ -200,7 +240,7 @@
reg = <0>;
reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
+ reset-deassert-us = <80000>;
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
@@ -217,7 +257,7 @@
* This signal should be handled by a USB specific power sequence
* in order to reset the Hub when USB bus is powered down.
*/
- usb-hub {
+ hog-0 {
gpio-hog;
gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
index 9e43f4dca9..2d769203f6 100644
--- a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
+++ b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
@@ -118,7 +118,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXL-LIBRETECH-S805X-AC";
+ model = "LIBRETECH-AC";
audio-widgets = "Speaker", "9J5-3 LEFT",
"Speaker", "9J5-2 RIGHT";
audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
diff --git a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
b/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
index 8bcdffdf55..60feac0179 100644
--- a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
@@ -5,9 +5,9 @@
/dts-v1/;
-#include <dt-bindings/input/input.h>
-
#include "meson-gxl-s905x-p212.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
/ {
compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
@@ -42,10 +42,10 @@
};
};
- pwmleds {
+ led-controller {
compatible = "pwm-leds";
- power {
+ led-1 {
label = "vim:red:power";
pwms = <&pwm_AO_ab 1 7812500 0>;
max-brightness = <255>;
@@ -63,6 +63,45 @@
};
};
};
+
+ sound {
+ compatible = "amlogic,gx-sound-card";
+ model = "KHADAS-VIM";
+ assigned-clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+ dai-format = "i2s";
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+ };
+ };
+
+ dai-link-2 {
+ sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&aiu {
+ status = "okay";
};
&cec_AO {
@@ -97,8 +136,7 @@
pinctrl-names = "default";
rtc: rtc@51 {
- /* has to be enabled manually when a battery is connected: */
- status = "disabled";
+ status = "okay";
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts
b/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts
index 675eaa8796..93d8f8aff7 100644
--- a/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts
+++ b/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts
@@ -84,7 +84,6 @@
regulator-always-on;
};
-
vcck: regulator-vcck {
compatible = "regulator-fixed";
regulator-name = "VCCK";
@@ -124,7 +123,6 @@
regulator-always-on;
};
-
vddio_card: regulator-vddio-card {
compatible = "regulator-gpio";
regulator-name = "VDDIO_CARD";
@@ -161,7 +159,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXL-LIBRETECH-S905X-CC-V2";
+ model = "LIBRETECH-CC-V2";
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
@@ -195,7 +193,6 @@
};
};
-
&aiu {
status = "okay";
};
@@ -207,7 +204,6 @@
hdmi-phandle = <&hdmi_tx>;
};
-
ðmac {
status = "okay";
};
diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
index 5ae7bb6209..82bfabfbd3 100644
--- a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
@@ -135,7 +135,7 @@
sound {
compatible = "amlogic,gx-sound-card";
- model = "GXL-LIBRETECH-S905X-CC";
+ model = "LIBRETECH-CC";
audio-aux-devs = <&dio2133>;
audio-widgets = "Line", "Lineout";
audio-routing = "AU2 INL", "ACODEC LOLN",
diff --git a/arch/arm/dts/meson-gxm-khadas-vim2.dts
b/arch/arm/dts/meson-gxm-khadas-vim2.dts
index bff8ec2c1c..18a4b7a6c5 100644
--- a/arch/arm/dts/meson-gxm-khadas-vim2.dts
+++ b/arch/arm/dts/meson-gxm-khadas-vim2.dts
@@ -7,9 +7,9 @@
/dts-v1/;
-#include <dt-bindings/input/input.h>
-
#include "meson-gxm.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
/ {
compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm";
@@ -81,10 +81,10 @@
};
};
- pwmleds {
+ led-controller {
compatible = "pwm-leds";
- power {
+ led-1 {
label = "vim:red:power";
pwms = <&pwm_AO_ab 1 7812500 0>;
max-brightness = <255>;
@@ -145,6 +145,45 @@
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
+
+ sound {
+ compatible = "amlogic,gx-sound-card";
+ model = "KHADAS-VIM2";
+ assigned-clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+ dai-format = "i2s";
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+ };
+ };
+
+ dai-link-2 {
+ sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&aiu {
+ status = "okay";
};
&cec_AO {
@@ -154,7 +193,6 @@
hdmi-phandle = <&hdmi_tx>;
};
-
&cpu_cooling_maps {
map0 {
cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
@@ -194,7 +232,7 @@
reg = <0>;
reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
+ reset-deassert-us = <80000>;
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
@@ -228,8 +266,7 @@
pinctrl-names = "default";
rtc: rtc@51 {
- /* has to be enabled manually when a battery is connected: */
- status = "disabled";
+ status = "okay";
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
@@ -341,7 +378,7 @@
#size-cells = <1>;
compatible = "winbond,w25q16", "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <3000000>;
+ spi-max-frequency = <104000000>;
};
};
diff --git a/arch/arm/dts/meson-gxm-wetek-core2.dts
b/arch/arm/dts/meson-gxm-wetek-core2.dts
index ec794c134c..1e7f77f9b5 100644
--- a/arch/arm/dts/meson-gxm-wetek-core2.dts
+++ b/arch/arm/dts/meson-gxm-wetek-core2.dts
@@ -22,7 +22,7 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-blue {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/dts/meson-gxm.dtsi b/arch/arm/dts/meson-gxm.dtsi
index fe41451122..411cc312fc 100644
--- a/arch/arm/dts/meson-gxm.dtsi
+++ b/arch/arm/dts/meson-gxm.dtsi
@@ -42,11 +42,28 @@
};
};
+ cpu0: cpu@0 {
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu1: cpu@1 {
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu2: cpu@2 {
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu3: cpu@3 {
+ capacity-dmips-mhz = <1024>;
+ };
+
cpu4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x100>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
#cooling-cells = <2>;
@@ -57,6 +74,7 @@
compatible = "arm,cortex-a53";
reg = <0x0 0x101>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
#cooling-cells = <2>;
@@ -67,6 +85,7 @@
compatible = "arm,cortex-a53";
reg = <0x0 0x102>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
#cooling-cells = <2>;
@@ -77,6 +96,7 @@
compatible = "arm,cortex-a53";
reg = <0x0 0x103>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
#cooling-cells = <2>;
diff --git a/arch/arm/dts/meson-khadas-vim3.dtsi
b/arch/arm/dts/meson-khadas-vim3.dtsi
index 7b46555ac5..3cf4ecb6d5 100644
--- a/arch/arm/dts/meson-khadas-vim3.dtsi
+++ b/arch/arm/dts/meson-khadas-vim3.dtsi
@@ -6,6 +6,7 @@
*/
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
@@ -13,6 +14,8 @@
aliases {
serial0 = &uart_AO;
ethernet0 = ðmac;
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
};
chosen {
@@ -41,13 +44,15 @@
compatible = "gpio-leds";
led-white {
- label = "vim3:white:sys";
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_STATUS;
gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
led-red {
- label = "vim3:red";
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
};
};
@@ -165,12 +170,17 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12B-KHADAS-VIM3";
- audio-aux-devs = <&tdmout_a>;
+ model = "KHADAS-VIM3";
+ audio-aux-devs = <&tdmin_a>, <&tdmout_a>;
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
"TDMOUT_A IN 1", "FRDDR_B OUT 0",
"TDMOUT_A IN 2", "FRDDR_C OUT 0",
- "TDM_A Playback", "TDMOUT_A OUT";
+ "TDM_A Playback", "TDMOUT_A OUT",
+ "TDMIN_A IN 0", "TDM_A Capture",
+ "TDMIN_A IN 3", "TDM_A Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
@@ -193,8 +203,20 @@
sound-dai = <&frddr_c>;
};
- /* 8ch hdmi interface */
dai-link-3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link-5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-6 {
sound-dai = <&tdmif_a>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
@@ -209,7 +231,7 @@
};
/* hdmi glue */
- dai-link-4 {
+ dai-link-7 {
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
codec {
@@ -278,12 +300,12 @@
};
ðmac {
- pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
};
&frddr_a {
@@ -330,7 +352,7 @@
#gpio-cells = <2>;
};
- rtc@51 {
+ rtc: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
@@ -349,9 +371,9 @@
};
&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
};
&saradc {
@@ -445,15 +467,30 @@
};
};
-
&tdmif_a {
status = "okay";
};
+&tdmin_a {
+ status = "okay";
+};
+
&tdmout_a {
status = "okay";
};
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
&tohdmitx {
status = "okay";
};
diff --git a/arch/arm/dts/meson-sm1-bananapi-m5.dts
b/arch/arm/dts/meson-sm1-bananapi-m5.dts
new file mode 100644
index 0000000000..effaa138b5
--- /dev/null
+++ b/arch/arm/dts/meson-sm1-bananapi-m5.dts
@@ -0,0 +1,646 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 BayLibre SAS
+ * Author: Neil Armstrong <narmstr...@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "bananapi,bpi-m5", "amlogic,sm1";
+ model = "Banana Pi BPI-M5";
+
+ adc_keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 2>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+
+ key {
+ label = "SW3";
+ linux,code = <BTN_3>;
+ press-threshold-microvolt = <1700000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* TOFIX: handle CVBS_DET on SARADC channel 0 */
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key {
+ label = "SW1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ };
+
+ blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ emmc_1v8: regulator-emmc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ dc_in: regulator-dc_in {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vddio_c: regulator-vddio_c {
+ compatible = "regulator-gpio";
+ regulator-name = "VDDIO_C";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+
+ gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
+ gpios-states = <1>;
+
+ states = <1800000 0>,
+ <3300000 1>;
+ };
+
+ tflash_vdd: regulator-tflash_vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "TFLASH_VDD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_in>;
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ vddao_1v8: regulator-vddao_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ vddcpu: regulator-vddcpu {
+ /*
+ * SY8120B1ABC DC/DC Regulator.
+ */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU";
+ regulator-min-microvolt = <690000>;
+ regulator-max-microvolt = <1050000>;
+
+ vin-supply = <&dc_in>;
+
+ pwms = <&pwm_AO_cd 1 1250 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* USB Hub Power Enable */
+ vl_pwr_en: regulator-vl_pwr_en {
+ compatible = "regulator-fixed";
+ regulator-name = "VL_PWR_EN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_in>;
+
+ gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "BPI-M5";
+ audio-widgets = "Line", "Lineout";
+ audio-aux-devs = <&tdmout_b>, <&tdmout_c>,
+ <&tdmin_a>, <&tdmin_b>, <&tdmin_c>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "TDMOUT_C IN 1", "FRDDR_B OUT 2",
+ "TDMOUT_C IN 2", "FRDDR_C OUT 2",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 4", "TDM_B Loopback",
+ "TDMIN_B IN 4", "TDM_B Loopback",
+ "TDMIN_C IN 4", "TDM_B Loopback",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TDMIN_B IN 5", "TDM_C Loopback",
+ "TDMIN_C IN 5", "TDM_C Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT",
+ "TODDR_A IN 2", "TDMIN_C OUT",
+ "TODDR_B IN 2", "TDMIN_C OUT",
+ "TODDR_C IN 2", "TDMIN_C OUT",
+ "Lineout", "ACODEC LOLP",
+ "Lineout", "ACODEC LORP";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ dai-link-3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link-5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-6 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+
+ codec-1 {
+ sound-dai = <&toacodec TOACODEC_IN_B>;
+ };
+ };
+
+ /* i2s jack output interface */
+ dai-link-7 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+ };
+
+ codec-1 {
+ sound-dai = <&toacodec TOACODEC_IN_C>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-8 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+
+ /* acodec glue */
+ dai-link-9 {
+ sound-dai = <&toacodec TOACODEC_OUT>;
+
+ codec {
+ sound-dai = <&acodec>;
+ };
+ };
+ };
+};
+
+&acodec {
+ AVDD-supply = <&vddao_1v8>;
+ status = "okay";
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU1_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu2 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU2_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu3 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU3_CLK>;
+ clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+ðmac {
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&external_phy>;
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&gpio {
+ gpio-line-names =
+ /* GPIOZ */
+ "ETH_MDIO", /* GPIOZ_0 */
+ "ETH_MDC", /* GPIOZ_1 */
+ "ETH_RXCLK", /* GPIOZ_2 */
+ "ETH_RX_DV", /* GPIOZ_3 */
+ "ETH_RXD0", /* GPIOZ_4 */
+ "ETH_RXD1", /* GPIOZ_5 */
+ "ETH_RXD2", /* GPIOZ_6 */
+ "ETH_RXD3", /* GPIOZ_7 */
+ "ETH_TXCLK", /* GPIOZ_8 */
+ "ETH_TXEN", /* GPIOZ_9 */
+ "ETH_TXD0", /* GPIOZ_10 */
+ "ETH_TXD1", /* GPIOZ_11 */
+ "ETH_TXD2", /* GPIOZ_12 */
+ "ETH_TXD3", /* GPIOZ_13 */
+ "ETH_INTR", /* GPIOZ_14 */
+ "ETH_NRST", /* GPIOZ_15 */
+ /* GPIOH */
+ "HDMI_SDA", /* GPIOH_0 */
+ "HDMI_SCL", /* GPIOH_1 */
+ "HDMI_HPD", /* GPIOH_2 */
+ "HDMI_CEC", /* GPIOH_3 */
+ "VL-RST_N", /* GPIOH_4 */
+ "CON1-P36", /* GPIOH_5 */
+ "VL-PWREN", /* GPIOH_6 */
+ "WiFi_3V3_1V8", /* GPIOH_7 */
+ "TFLASH_VDD_EN", /* GPIOH_8 */
+ /* BOOT */
+ "eMMC_D0", /* BOOT_0 */
+ "eMMC_D1", /* BOOT_1 */
+ "eMMC_D2", /* BOOT_2 */
+ "eMMC_D3", /* BOOT_3 */
+ "eMMC_D4", /* BOOT_4 */
+ "eMMC_D5", /* BOOT_5 */
+ "eMMC_D6", /* BOOT_6 */
+ "eMMC_D7", /* BOOT_7 */
+ "eMMC_CLK", /* BOOT_8 */
+ "",
+ "eMMC_CMD", /* BOOT_10 */
+ "",
+ "eMMC_RST#", /* BOOT_12 */
+ "eMMC_DS", /* BOOT_13 */
+ /* GPIOC */
+ "SD_D0_B", /* GPIOC_0 */
+ "SD_D1_B", /* GPIOC_1 */
+ "SD_D2_B", /* GPIOC_2 */
+ "SD_D3_B", /* GPIOC_3 */
+ "SD_CLK_B", /* GPIOC_4 */
+ "SD_CMD_B", /* GPIOC_5 */
+ "CARD_EN_DET", /* GPIOC_6 */
+ "",
+ /* GPIOA */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "",
+ "CON1-P27", /* GPIOA_14 */
+ "CON1-P28", /* GPIOA_15 */
+ /* GPIOX */
+ "CON1-P16", /* GPIOX_0 */
+ "CON1-P18", /* GPIOX_1 */
+ "CON1-P22", /* GPIOX_2 */
+ "CON1-P11", /* GPIOX_3 */
+ "CON1-P13", /* GPIOX_4 */
+ "CON1-P07", /* GPIOX_5 */
+ "CON1-P33", /* GPIOX_6 */
+ "CON1-P15", /* GPIOX_7 */
+ "CON1-P19", /* GPIOX_8 */
+ "CON1-P21", /* GPIOX_9 */
+ "CON1-P24", /* GPIOX_10 */
+ "CON1-P23", /* GPIOX_11 */
+ "CON1-P08", /* GPIOX_12 */
+ "CON1-P10", /* GPIOX_13 */
+ "CON1-P29", /* GPIOX_14 */
+ "CON1-P31", /* GPIOX_15 */
+ "CON1-P26", /* GPIOX_16 */
+ "CON1-P03", /* GPIOX_17 */
+ "CON1-P05", /* GPIOX_18 */
+ "CON1-P32"; /* GPIOX_19 */
+
+ /*
+ * WARNING: The USB Hub on the BPI-M5 needs a reset signal
+ * to be turned high in order to be detected by the USB Controller
+ * This signal should be handled by a USB specific power sequence
+ * in order to reset the Hub when USB bus is powered down.
+ */
+ usb-hub {
+ gpio-hog;
+ gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
+&gpio_ao {
+ gpio-line-names =
+ /* GPIOAO */
+ "DEBUG TX", /* GPIOAO_0 */
+ "DEBUG RX", /* GPIOAO_1 */
+ "SYS_LED2", /* GPIOAO_2 */
+ "UPDATE_KEY", /* GPIOAO_3 */
+ "CON1-P40", /* GPIOAO_4 */
+ "IR_IN", /* GPIOAO_5 */
+ "TF_3V3N_1V8_EN", /* GPIOAO_6 */
+ "CON1-P35", /* GPIOAO_7 */
+ "CON1-P12", /* GPIOAO_8 */
+ "CON1-P37", /* GPIOAO_9 */
+ "CON1-P38", /* GPIOAO_10 */
+ "SYS_LED", /* GPIOAO_11 */
+ /* GPIOE */
+ "VDDEE_PWM", /* GPIOE_0 */
+ "VDDCPU_PWM", /* GPIOE_1 */
+ "TF_PWR_EN"; /* GPIOE_2 */
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&dc_in>;
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddao_1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+ disable-wp;
+
+ /* TOFIX: SD card is barely usable in SDR modes */
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&tflash_vdd>;
+ vqmmc-supply = <&vddio_c>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmif_c {
+ status = "okay";
+};
+
+&tdmin_a {
+ status = "okay";
+};
+
+&tdmin_b {
+ status = "okay";
+};
+
+&tdmin_c {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tdmout_c {
+ status = "okay";
+};
+
+&toacodec {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb2_phy0 {
+ phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+ /* Enable the hub which is connected to this port */
+ phy-supply = <&vl_pwr_en>;
+};
diff --git a/arch/arm/dts/meson-sm1-khadas-vim3l.dts
b/arch/arm/dts/meson-sm1-khadas-vim3l.dts
index 4b517ca720..f2c0981435 100644
--- a/arch/arm/dts/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm/dts/meson-sm1-khadas-vim3l.dts
@@ -32,6 +32,19 @@
regulator-boot-on;
regulator-always-on;
};
+
+ sound {
+ model = "G12B-KHADAS-VIM3L";
+ audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+ "TDMOUT_A IN 1", "FRDDR_B OUT 0",
+ "TDMOUT_A IN 2", "FRDDR_C OUT 0",
+ "TDM_A Playback", "TDMOUT_A OUT",
+ "TDMIN_A IN 0", "TDM_A Capture",
+ "TDMIN_A IN 13", "TDM_A Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT";
+ };
};
&cpu0 {
@@ -89,13 +102,12 @@
status = "okay";
};
-&sd_emmc_a {
- sd-uhs-sdr50;
-};
-
&usb {
phys = <&usb2_phy0>, <&usb2_phy1>;
phy-names = "usb2-phy0", "usb2-phy1";
};
*/
+&sd_emmc_a {
+ sd-uhs-sdr50;
+};
diff --git a/arch/arm/dts/meson-sm1-odroid-c4.dts
b/arch/arm/dts/meson-sm1-odroid-c4.dts
index cf5a98f0e4..8c30ce6368 100644
--- a/arch/arm/dts/meson-sm1-odroid-c4.dts
+++ b/arch/arm/dts/meson-sm1-odroid-c4.dts
@@ -5,34 +5,12 @@
/dts-v1/;
-#include "meson-sm1.dtsi"
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include "meson-sm1-odroid.dtsi"
/ {
compatible = "hardkernel,odroid-c4", "amlogic,sm1";
model = "Hardkernel ODROID-C4";
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
leds {
compatible = "gpio-leds";
@@ -45,324 +23,19 @@
};
};
- tflash_vdd: regulator-tflash_vdd {
- compatible = "regulator-fixed";
-
- regulator-name = "TFLASH_VDD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- tf_io: gpio-regulator-tf_io {
- compatible = "regulator-gpio";
-
- regulator-name = "TF_IO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
- gpios-states = <0>;
-
- states = <3300000 0>,
- <1800000 1>;
- };
-
- flash_1v8: regulator-flash_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "FLASH_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- main_12v: regulator-main_12v {
- compatible = "regulator-fixed";
- regulator-name = "12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&main_12v>;
- };
-
- vcc_1v8: regulator-vcc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- /* FIXME: actually controlled by VDDCPU_B_EN */
- };
-
- vddcpu: regulator-vddcpu {
- /*
- * MP8756GD Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&main_12v>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- hub_5v: regulator-hub_5v {
- compatible = "regulator-fixed";
- regulator-name = "HUB_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to the Hub CHIPENABLE, LOW sets low power state */
- gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- usb_pwr_en: regulator-usb_pwr_en {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR_EN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to the microUSB port power enable */
- gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vddao_1v8: regulator-vddao_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&main_12v>;
- regulator-always-on;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
sound {
- compatible = "amlogic,axg-sound-card";
- model = "SM1-ODROID-C4";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* hdmi glue */
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU1_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu2 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU2_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu3 {
- cpu-supply = <&vddcpu>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPU3_CLK>;
- clock-latency = <50000>;
-};
-
-&ext_mdio {
- external_phy: ethernet-phy@0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ model = "ODROID-C4";
};
};
-ðmac {
- pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
&gpio {
- gpio-line-names =
- /* GPIOZ */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- /* GPIOH */
- "", "", "", "", "",
- "PIN_36", /* GPIOH_5 */
- "PIN_26", /* GPIOH_6 */
- "PIN_32", /* GPIOH_7 */
- "",
- /* BOOT */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- /* GPIOC */
- "", "", "", "", "", "", "", "",
- /* GPIOA */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "",
- "PIN_27", /* GPIOA_14 */
- "PIN_28", /* GPIOA_15 */
- /* GPIOX */
- "PIN_16", /* GPIOX_0 */
- "PIN_18", /* GPIOX_1 */
- "PIN_22", /* GPIOX_2 */
- "PIN_11", /* GPIOX_3 */
- "PIN_13", /* GPIOX_4 */
- "PIN_7", /* GPIOX_5 */
- "PIN_33", /* GPIOX_6 */
- "PIN_15", /* GPIOX_7 */
- "PIN_19", /* GPIOX_8 */
- "PIN_21", /* GPIOX_9 */
- "PIN_24", /* GPIOX_10 */
- "PIN_23", /* GPIOX_11 */
- "PIN_8", /* GPIOX_12 */
- "PIN_10", /* GPIOX_13 */
- "PIN_29", /* GPIOX_14 */
- "PIN_31", /* GPIOX_15 */
- "PIN_12", /* GPIOX_16 */
- "PIN_3", /* GPIOX_17 */
- "PIN_5", /* GPIOX_18 */
- "PIN_35"; /* GPIOX_19 */
-
/*
* WARNING: The USB Hub on the Odroid-C4 needs a reset signal
* to be turned high in order to be detected by the USB Controller
* This signal should be handled by a USB specific power sequence
* in order to reset the Hub when USB bus is powered down.
*/
- usb-hub {
+ hog-0 {
gpio-hog;
gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -370,121 +43,6 @@
};
};
-&gpio_ao {
- gpio-line-names =
- /* GPIOAO */
- "", "", "", "",
- "PIN_47", /* GPIOAO_4 */
- "", "",
- "PIN_45", /* GPIOAO_7 */
- "PIN_46", /* GPIOAO_8 */
- "PIN_44", /* GPIOAO_9 */
- "PIN_42", /* GPIOAO_10 */
- "",
- /* GPIOE */
- "", "", "";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
linux,rc-map-name = "rc-odroid";
};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&saradc {
- status = "okay";
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <200000000>;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&tflash_vdd>;
- vqmmc-supply = <&tf_io>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&flash_1v8>;
-};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_pwr_en>;
-};
-
-&usb2_phy0 {
- phy-supply = <&vcc_5v>;
-};
-
-&usb2_phy1 {
- /* Enable the hub which is connected to this port */
- phy-supply = <&hub_5v>;
-};
diff --git a/arch/arm/dts/meson-sm1-odroid-hc4.dts
b/arch/arm/dts/meson-sm1-odroid-hc4.dts
new file mode 100644
index 0000000000..f3f953225b
--- /dev/null
+++ b/arch/arm/dts/meson-sm1-odroid-hc4.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobet...@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-odroid.dtsi"
+
+/ {
+ compatible = "hardkernel,odroid-hc4", "amlogic,sm1";
+ model = "Hardkernel ODROID-HC4";
+
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
+ };
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ cooling-levels = <0 120 170 220>;
+ pwms = <&pwm_cd 1 40000 0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ panic-indicator;
+ };
+
+ led-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ /* Powers the SATA Disk 0 regulator, which is enabled when a disk load
is detected */
+ p12v_0: regulator-p12v_0 {
+ compatible = "regulator-fixed";
+ regulator-name = "P12V_0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&main_12v>;
+
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ /* Powers the SATA Disk 1 regulator, which is enabled when a disk load
is detected */
+ p12v_1: regulator-p12v_1 {
+ compatible = "regulator-fixed";
+ regulator-name = "P12V_1";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&main_12v>;
+
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ sound {
+ model = "ODROID-HC4";
+ };
+};
+
+&cpu_thermal {
+ cooling-maps {
+ map {
+ trip = <&cpu_passive>;
+ cooling-device = <&fan0 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&ir {
+ linux,rc-map-name = "rc-odroid";
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ status = "okay";
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
+&pcie {
+ status = "okay";
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_d_x6_pins>;
+};
+
+&sd_emmc_c {
+ status = "disabled";
+};
+
+&spifc {
+ status = "okay";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
+&usb {
+ phys = <&usb2_phy1>;
+ phy-names = "usb2-phy1";
+};
+
+&usb2_phy0 {
+ status = "disabled";
+};
diff --git a/arch/arm/dts/meson-sm1-odroid.dtsi
b/arch/arm/dts/meson-sm1-odroid.dtsi
new file mode 100644
index 0000000000..fd0ad85c16
--- /dev/null
+++ b/arch/arm/dts/meson-sm1-odroid.dtsi
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobet...@gmail.com>
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ tflash_vdd: regulator-tflash_vdd {
+ compatible = "regulator-fixed";
+
+ regulator-name = "TFLASH_VDD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ tf_io: gpio-regulator-tf_io {
+ compatible = "regulator-gpio";
+
+ regulator-name = "TF_IO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_5v>;
+
+ enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+
+ gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>;
+ gpios-states = <0>;
+
+ states = <3300000 0>,
+ <1800000 1>;
+ };
+
+ flash_1v8: regulator-flash_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "FLASH_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ main_12v: regulator-main_12v {
+ compatible = "regulator-fixed";
+ regulator-name = "12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ vcc_5v: regulator-vcc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&main_12v>;
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ };
+
+ vcc_1v8: regulator-vcc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ /* FIXME: actually controlled by VDDCPU_B_EN */
+ };
+
+ vddcpu: regulator-vddcpu {
+ /*
+ * MP8756GD Regulator.
+ */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU";
+ regulator-min-microvolt = <721000>;
+ regulator-max-microvolt = <1022000>;
+
+ vin-supply = <&main_12v>;
+
+ pwms = <&pwm_AO_cd 1 1250 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ usb_pwr_en: regulator-usb_pwr_en {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR_EN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+
+ /* Connected to the microUSB port power enable */
+ gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vddao_1v8: regulator-vddao_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&main_12v>;
+ regulator-always-on;
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU1_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu2 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU2_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu3 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU3_CLK>;
+ clock-latency = <50000>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+ðmac {
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&gpio {
+ gpio-line-names =
+ /* GPIOZ */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* GPIOH */
+ "", "", "", "", "",
+ "PIN_36", /* GPIOH_5 */
+ "PIN_26", /* GPIOH_6 */
+ "PIN_32", /* GPIOH_7 */
+ "",
+ /* BOOT */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* GPIOC */
+ "", "", "", "", "", "", "", "",
+ /* GPIOA */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "",
+ "PIN_27", /* GPIOA_14 */
+ "PIN_28", /* GPIOA_15 */
+ /* GPIOX */
+ "PIN_16", /* GPIOX_0 */
+ "PIN_18", /* GPIOX_1 */
+ "PIN_22", /* GPIOX_2 */
+ "PIN_11", /* GPIOX_3 */
+ "PIN_13", /* GPIOX_4 */
+ "PIN_7", /* GPIOX_5 */
+ "PIN_33", /* GPIOX_6 */
+ "PIN_15", /* GPIOX_7 */
+ "PIN_19", /* GPIOX_8 */
+ "PIN_21", /* GPIOX_9 */
+ "PIN_24", /* GPIOX_10 */
+ "PIN_23", /* GPIOX_11 */
+ "PIN_8", /* GPIOX_12 */
+ "PIN_10", /* GPIOX_13 */
+ "PIN_29", /* GPIOX_14 */
+ "PIN_31", /* GPIOX_15 */
+ "PIN_12", /* GPIOX_16 */
+ "PIN_3", /* GPIOX_17 */
+ "PIN_5", /* GPIOX_18 */
+ "PIN_35"; /* GPIOX_19 */
+};
+
+&gpio_ao {
+ gpio-line-names =
+ /* GPIOAO */
+ "", "", "", "",
+ "PIN_47", /* GPIOAO_4 */
+ "", "",
+ "PIN_45", /* GPIOAO_7 */
+ "PIN_46", /* GPIOAO_8 */
+ "PIN_44", /* GPIOAO_9 */
+ "PIN_42", /* GPIOAO_10 */
+ "",
+ /* GPIOE */
+ "", "", "";
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <200000000>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&tflash_vdd>;
+ vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&flash_1v8>;
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+ phy-supply = <&vcc_5v>;
+};
+
diff --git a/arch/arm/dts/meson-sm1-sei610.dts
b/arch/arm/dts/meson-sm1-sei610.dts
index 5ab139a34c..2194a77897 100644
--- a/arch/arm/dts/meson-sm1-sei610.dts
+++ b/arch/arm/dts/meson-sm1-sei610.dts
@@ -101,20 +101,20 @@
};
};
- leds {
+ led-controller-1 {
compatible = "gpio-leds";
- led-bluetooth {
+ led-1 {
label = "sei610:blue:bt";
gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW |
GPIO_OPEN_DRAIN)>;
default-state = "off";
};
};
- pwmleds {
+ led-controller-2 {
compatible = "pwm-leds";
- power {
+ led-2 {
label = "sei610:red:power";
pwms = <&pwm_AO_ab 0 30518 0>;
max-brightness = <255>;
@@ -220,7 +220,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "SM1-SEI610";
+ model = "SEI610";
audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
<&tdmin_a>, <&tdmin_b>;
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
diff --git a/arch/arm/dts/meson-sm1.dtsi b/arch/arm/dts/meson-sm1.dtsi
index 71317f5aad..3d8b1f4f20 100644
--- a/arch/arm/dts/meson-sm1.dtsi
+++ b/arch/arm/dts/meson-sm1.dtsi
@@ -130,7 +130,7 @@
opp-microvolt = <790000>;
};
- opp-1512000000 {
+ opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <800000>;
};
@@ -401,6 +401,16 @@
status = "disabled";
};
+ toacodec: audio-controller@740 {
+ compatible = "amlogic,sm1-toacodec",
+ "amlogic,g12a-toacodec";
+ reg = <0x0 0x740 0x0 0x4>;
+ #sound-dai-cells = <1>;
+ sound-name-prefix = "TOACODEC";
+ resets = <&clkc_audio AUD_RESET_TOACODEC>;
+ status = "disabled";
+ };
+
tohdmitx: audio-controller@744 {
compatible = "amlogic,sm1-tohdmitx",
"amlogic,g12a-tohdmitx";
diff --git a/include/dt-bindings/clock/axg-clkc.h
b/include/dt-bindings/clock/axg-clkc.h
index fd1f938c38..93752ea107 100644
--- a/include/dt-bindings/clock/axg-clkc.h
+++ b/include/dt-bindings/clock/axg-clkc.h
@@ -70,7 +70,31 @@
#define CLKID_HIFI_PLL 69
#define CLKID_PCIE_CML_EN0 79
#define CLKID_PCIE_CML_EN1 80
-#define CLKID_MIPI_ENABLE 81
#define CLKID_GEN_CLK 84
+#define CLKID_VPU_0_SEL 92
+#define CLKID_VPU_0 93
+#define CLKID_VPU_1_SEL 95
+#define CLKID_VPU_1 96
+#define CLKID_VPU 97
+#define CLKID_VAPB_0_SEL 99
+#define CLKID_VAPB_0 100
+#define CLKID_VAPB_1_SEL 102
+#define CLKID_VAPB_1 103
+#define CLKID_VAPB_SEL 104
+#define CLKID_VAPB 105
+#define CLKID_VCLK 106
+#define CLKID_VCLK2 107
+#define CLKID_VCLK_DIV1 122
+#define CLKID_VCLK_DIV2 123
+#define CLKID_VCLK_DIV4 124
+#define CLKID_VCLK_DIV6 125
+#define CLKID_VCLK_DIV12 126
+#define CLKID_VCLK2_DIV1 127
+#define CLKID_VCLK2_DIV2 128
+#define CLKID_VCLK2_DIV4 129
+#define CLKID_VCLK2_DIV6 130
+#define CLKID_VCLK2_DIV12 131
+#define CLKID_CTS_ENCL 133
+#define CLKID_VDIN_MEAS 136
#endif /* __AXG_CLKC_H */
diff --git a/include/dt-bindings/clock/g12a-clkc.h
b/include/dt-bindings/clock/g12a-clkc.h
index 40d49940d8..a93b58c5e1 100644
--- a/include/dt-bindings/clock/g12a-clkc.h
+++ b/include/dt-bindings/clock/g12a-clkc.h
@@ -147,5 +147,7 @@
#define CLKID_SPICC1_SCLK 261
#define CLKID_NNA_AXI_CLK 264
#define CLKID_NNA_CORE_CLK 267
+#define CLKID_MIPI_DSI_PXCLK_SEL 269
+#define CLKID_MIPI_DSI_PXCLK 270
#endif /* __G12A_CLKC_H */
--
2.25.1
