From: Igor Opaniuk <igor.opan...@toradex.com>
Enable and set preboot var with fdtfile evaluation.
It will be checked and run immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
entering interactive mode.
This provides possibility to use different boot cmds in interactive mode
without manual setting fdtfile value, as it it's already evaluated
before entering interactive mode.
Signed-off-by: Igor Opaniuk <igor.opan...@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
Reviewed-by: Fabio Estevam <feste...@gmail.com>
---
(no changes since v2)
Changes in v2:
- New patch addressing dynamic fdtfile definition.
configs/verdin-imx8mm_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index ced0d0acc37..ed14ff3b114 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -26,7 +26,8 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_SYSTEM_SETUP=y
# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_DEFAULT_FDT_FILE="fsl-imx8mm-verdin-dev.dtb"
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="setenv fdtfile imx8mm-verdin-${variant}-${fdt_board}.dtb"
CONFIG_LOG=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.26.2
