On 25.10.21 15:12, Marek Behún wrote:
From: Marek Behún <marek.be...@nic.cz>Hello Stefan, these are another improvements for kwboot, please apply only after series arm: mvebu: nandpagesize support for kwbimage v1 The main improvement is in patch 5, which changes where we inject the code for changing baudrate back to 115200 Baud after fast upload. Instead of injecting it before the main data image, we now inject it after. This is because there are some kwb images that upload at address 0, and injecting the code before that doesn't work, since there is no RAM mapped at 0xfffff000. Marek & Pali Pali Rohár (13): tools: kwboot: Initialize rfds to zero tools: kwboot: Fix initialization of tty device tools: kwboot: Reserve enough space for patching kwbimage in memory tools: kwboot: Validate 4-byte image data checksum tools: kwboot: Inject baudrate change back code after data part tools: kwboot: Recalculate 4-byte data checksum after injecting baudrate code tools: kwboot: Correctly set configuration of UART for BootROM messages tools: kwboot: Show verbose message when waiting for baudrate change magic tools: kwboot: Simplify code for aligning image header tools: kwboot: Do not modify kwbimage header before increasing its size tools: kwboot: Calculate real used space in kwbimage header when calling kwboot_img_grow_hdr() tools: kwboot: Change retry loop from decreasing to increasing tools: kwboot: Resend first 3 xmodem retry packets immediately tools/kwboot.c | 178 +++++++++++++++++++++++++++++++++---------------- 1 file changed, 120 insertions(+), 58 deletions(-)
Applied to u-boot-marvell/master Thanks, Stefan
