On Thu, Nov 4, 2021 at 6:32 AM Andre Przywara <andre.przyw...@arm.com> wrote: > > The sunxi MUSB glue driver has some code to check for external VBUS > presence when it's going to use the MUSB host mode, and it warns if > there is VBUS provided through the cable (in sunxi_musb_enable()). > > This code was apparently copied to the USB gadget detection code > (g_dnl_board_usb_cable_connected()), but here we actually *expect* > external VBUS power, so a warning is wrong and confusing. > So far this message rarely triggered, but a recent patch (6fa41cdd19b9) > changed this: > =========================== > => ums 0 mmc 2 > UMS: LUN 0, dev mmc 2, hwpart 0, sector 0x0, count 0xe90000 > A charger is plugged into the OTG > /A charger is plugged into the OTG > \A charger is plugged into the OTG > |A charger is plugged into the OTG > -A charger is plugged into the OTG > .... > =========================== > > Remove the message for the gadget cable detection call, and just return > the status of the VBUS detection, as this is what the callers are after. > > Signed-off-by: Andre Przywara <andre.przyw...@arm.com> > ---
Reviewed-by: Jagan Teki <ja...@amarulasolutions.com>