Hi Tim et al.
On Wed, 2022-01-05 at 11:08 -0800, Tim Harvey wrote:
> On Wed, Jan 5, 2022 at 3:34 AM ZHIZHIKIN Andrey
> <andrey.zhizhi...@leica-geosystems.com> wrote:
> >
> > Hello Tim,
> >
> > > -----Original Message-----
> > > From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Tim Harvey
> > > Sent: Tuesday, January 4, 2022 11:48 PM
> > > To: u-boot <u-boot@lists.denx.de>; Stefano Babic <sba...@denx.de>; Fabio
> > > Estevam
> > > <feste...@gmail.com>
> > > Cc: Schrempf Frieder <frieder.schre...@kontron.de>; Adam Ford
> > > <aford...@gmail.com>; Marcel Ziswiler <mar...@ziswiler.com>; Jagan Teki
> > > <ja...@amarulasolutions.com>
> > > Subject: mkimage_fit_atf.sh: not found
> > >
> > > Stefano and Fabio,
> > >
> > > I'm seeing the imx8mm_venice_defconfig target failing to build on
> > > master due to mkimage_fit_atf.sh not found:
> > > ./"arch/arm/mach-imx/mkimage_fit_atf.sh" \
> > > arch/arm/dts/imx8mm-venice-gw71xx-0x.dtb
> > > arch/arm/dts/imx8mm-venice-gw72xx-0x.dtb
> > > arch/arm/dts/imx8mm-venice-gw73xx-0x.dtb
> > > arch/arm/dts/imx8mm-venice-gw7901.dtb
> > > arch/arm/dts/imx8mm-venice-gw7902.dtb > u-boot.its
> > > /bin/sh: 1: ./arch/arm/mach-imx/mkimage_fit_atf.sh: not found
> > >
> >
> > This has been dropped in d9a6f0eed6 ("tree: imx: remove old fit generator
> > script")
>
> So why was that merged when it breaks several boards that are not
> switched to binman because of the CI issue?
I have to admit that I did not closely follow that discussion lately. But it
seems to me that this should be
solvable, not?
Anyway, at least in my local buildman use case just touching resp. binary blob
file names helped me getting
thought this:
⬢[zim@toolbox u-boot.git]$ touch lpddr4_pmu_train_1d_imem.bin
⬢[zim@toolbox u-boot.git]$ touch lpddr4_pmu_train_1d_dmem.bin
⬢[zim@toolbox u-boot.git]$ touch lpddr4_pmu_train_2d_imem.bin
⬢[zim@toolbox u-boot.git]$ touch lpddr4_pmu_train_2d_dmem.bin
⬢[zim@toolbox u-boot.git]$ touch bl31.bin
Couldn't that somehow also be done for CI?
> > > As far as I can tell the other boards that are still using
> > > SPL_FIT_GENERATOR also fail due to this (ie imx8mm_beacon_defconfig,
> > > imx8mq_evk_defconfig, imx8mm-icore-mx8mm-edimm2.2_defconfig, etc).
> >
> > imx8mq_evk is already converted and I've sent a patch for it, see [1].
> >
> > >
> > > What is the state of the binman conversion? I submitted a series to
> > > convert my boards to binman and it has just been sitting without any
> > > response for months now [1].
> >
> > I believe that the reason for your series sitting in the queue is the same
> > as
> > for imx8mq_evk: missing binary blobs (ATF and DDR) are failing CI builds.
> >
>
> Right, so imx8mq_evk (and others) are completely broken for the
> pending release correct?
>
> Sounds like we need to revert d9a6f0eed6 ("tree: imx: remove old fit
> generator script")
I kind of agree. However, much smarter would be to finish that binman
conversion which I also still have one in
flight [1] plus the follow on patch series [2] (plus an unrelated i.MX 8M Plus
board addition [3]) all still
sitting there idle since October with acks resp. reviewed-bys in place!
Cheers
Marcel
> Tim
>
> > >
> > > I'm not sure when the above breakage occurred but the conversion to
> > > binman resolves it and other things.
> > >
> > > Please let me know what you expect me to do to resolve this as there
> > > is a release pending.
> > >
> > > Best regards,
> > >
> > > Tim
> > > [1]
> > > https://patchwork.ozlabs.org/project/uboot/patch/20211006201700.3018-1-
> > > thar...@gateworks.com/
> >
> > -- andrey
> >
> > Link: [1]:
> > http://patchwork.ozlabs.org/project/uboot/patch/20211203161802.12699-1-andrey.zhizhi...@leica-geosystems.com/
[1]
http://patchwork.ozlabs.org/project/uboot/patch/20211022214340.1214793-1-mar...@ziswiler.com/
[2] http://patchwork.ozlabs.org/project/uboot/list/?series=268510
[3]
http://patchwork.ozlabs.org/project/uboot/patch/20211022073104.1105628-1-mar...@ziswiler.com/
