pre-requisite for SDIO driver support for Marvell SoCs (Kirkwood)
Signed-off-by: Gérald Kerma <[email protected]>
---
arch/arm/include/asm/arch-kirkwood/kirkwood.h | 1 +
include/configs/mv-common.h | 9 +++++++++
2 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h
b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
index 0104418..4f9fe7e 100644
--- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h
+++ b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
@@ -60,6 +60,7 @@
#define KW_EGIGA0_BASE (KW_REGISTER(0x72000))
#define KW_EGIGA1_BASE (KW_REGISTER(0x76000))
#define KW_SATA_BASE (KW_REGISTER(0x80000))
+#define KW_SDIO_BASE (KW_REGISTER(0x90000))
/* Kirkwood Sata controller has two ports */
#define KW_SATA_PORT0_OFFSET 0x2000
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index de0121e..62ef0b9 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -63,6 +63,7 @@
#define CONFIG_I2C_MVTWSI_BASE KW_TWSI_BASE
#define MV_UART0_BASE KW_UART0_BASE
+#define MV_SDIO_BASE KW_SDIO_BASE
#define MV_SATA_BASE KW_SATA_BASE
#define MV_SATA_PORT0_OFFSET KW_SATA_PORT0_OFFSET
#define MV_SATA_PORT1_OFFSET KW_SATA_PORT1_OFFSET
@@ -182,6 +183,14 @@
#endif /* CONFIG_CMD_NET */
/*
+ * SDIO/MMC Card Configuration
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_MV_SDIO
+#endif /* CONFIG_CMD_MMC */
+
+/*
* USB/EHCI
*/
#ifdef CONFIG_CMD_USB
--
1.7.1
--
G.K
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
