> -----Original Message----- > From: Gérald Kerma [mailto:[email protected]] > Sent: Sunday, November 21, 2010 4:37 PM > To: [email protected] > Cc: Prafulla Wadaskar; Ashish Karkare; Prabhanjan Sarnaik > Subject: [PATCH v3 1/3] Kirkwood: pre-requisite for SDIO driver support > > > pre-requisite for SDIO driver support for Marvell SoCs (Kirkwood) > > Signed-off-by: Gérald Kerma <[email protected]> > --- > arch/arm/include/asm/arch-kirkwood/kirkwood.h | 1 + > include/configs/mv-common.h | 9 +++++++++ > 2 files changed, 10 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h > b/arch/arm/include/asm/arch-kirkwood/kirkwood.h > index 0104418..4f9fe7e 100644 > --- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h > +++ b/arch/arm/include/asm/arch-kirkwood/kirkwood.h > @@ -60,6 +60,7 @@ > #define KW_EGIGA0_BASE (KW_REGISTER(0x72000)) > #define KW_EGIGA1_BASE (KW_REGISTER(0x76000)) > #define KW_SATA_BASE (KW_REGISTER(0x80000)) > +#define KW_SDIO_BASE (KW_REGISTER(0x90000)) > > /* Kirkwood Sata controller has two ports */ > #define KW_SATA_PORT0_OFFSET 0x2000 > diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h > index de0121e..62ef0b9 100644 > --- a/include/configs/mv-common.h > +++ b/include/configs/mv-common.h > @@ -63,6 +63,7 @@ > > #define CONFIG_I2C_MVTWSI_BASE KW_TWSI_BASE > #define MV_UART0_BASE KW_UART0_BASE > +#define MV_SDIO_BASE KW_SDIO_BASE > #define MV_SATA_BASE KW_SATA_BASE > #define MV_SATA_PORT0_OFFSET KW_SATA_PORT0_OFFSET > #define MV_SATA_PORT1_OFFSET KW_SATA_PORT1_OFFSET > @@ -182,6 +183,14 @@ > #endif /* CONFIG_CMD_NET */ > > /* > + * SDIO/MMC Card Configuration > + */ > +#ifdef CONFIG_CMD_MMC > +#define CONFIG_MMC
Please check if you can define CONFIG_GENERIC_MMC here and reduce code in driver file. Regards.. Prafulla . . _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
