Disable mmc from u-boot.dtsi file because it was there only for kv260 board. With kr260 this is not needed because we will switch to full DT per board with SD/EMMC there too.
Signed-off-by: Michal Simek <[email protected]> --- arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi | 21 -------------------- arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi | 21 -------------------- 2 files changed, 42 deletions(-) delete mode 100644 arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi delete mode 100644 arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi diff --git a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi b/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi deleted file mode 100644 index 467df9f23a1c..000000000000 --- a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * dts file for Xilinx ZynqMP K26/KV260 SD wiring - * - * (C) Copyright 2020 - 2021, Xilinx, Inc. - * - * Michal Simek <[email protected]> - */ - -/* SD0 only supports 3.3V, no level shifter */ -&sdhci1 { /* on CC - MIO 39 - 51 */ - status = "okay"; - no-1-8-v; - disable-wp; - broken-cd; - xlnx,mio-bank = <1>; - /* Do not run SD in HS mode from bootloader */ - sdhci-caps-mask = <0 0x200000>; - sdhci-caps = <0 0>; - max-frequency = <19000000>; -}; diff --git a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi b/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi deleted file mode 100644 index 34e6328fb66f..000000000000 --- a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * dts file for Xilinx ZynqMP Z2-VSOM - * - * (C) Copyright 2020 - 2021, Xilinx, Inc. - * - * Michal Simek <[email protected]> - */ - -/* SD0 only supports 3.3V, no level shifter */ -&sdhci1 { /* FIXME - on CC - MIO 39 - 51 */ - status = "okay"; - no-1-8-v; - disable-wp; - broken-cd; - xlnx,mio-bank = <1>; - /* Do not run SD in HS mode from bootloader */ - sdhci-caps-mask = <0 0x200000>; - sdhci-caps = <0 0>; - max-frequency = <19000000>; -}; -- 2.34.1
