st 19. 1. 2022 v 12:01 odesÃlatel Michal Simek <[email protected]> napsal: > > Disable mmc from u-boot.dtsi file because it was there only for kv260 > board. With kr260 this is not needed because we will switch to full DT per > board with SD/EMMC there too. > > Signed-off-by: Michal Simek <[email protected]> > --- > > arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi | 21 -------------------- > arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi | 21 -------------------- > 2 files changed, 42 deletions(-) > delete mode 100644 arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi > delete mode 100644 arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi > > diff --git a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi > b/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi > deleted file mode 100644 > index 467df9f23a1c..000000000000 > --- a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi > +++ /dev/null > @@ -1,21 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0 > -/* > - * dts file for Xilinx ZynqMP K26/KV260 SD wiring > - * > - * (C) Copyright 2020 - 2021, Xilinx, Inc. > - * > - * Michal Simek <[email protected]> > - */ > - > -/* SD0 only supports 3.3V, no level shifter */ > -&sdhci1 { /* on CC - MIO 39 - 51 */ > - status = "okay"; > - no-1-8-v; > - disable-wp; > - broken-cd; > - xlnx,mio-bank = <1>; > - /* Do not run SD in HS mode from bootloader */ > - sdhci-caps-mask = <0 0x200000>; > - sdhci-caps = <0 0>; > - max-frequency = <19000000>; > -}; > diff --git a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi > b/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi > deleted file mode 100644 > index 34e6328fb66f..000000000000 > --- a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi > +++ /dev/null > @@ -1,21 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0 > -/* > - * dts file for Xilinx ZynqMP Z2-VSOM > - * > - * (C) Copyright 2020 - 2021, Xilinx, Inc. > - * > - * Michal Simek <[email protected]> > - */ > - > -/* SD0 only supports 3.3V, no level shifter */ > -&sdhci1 { /* FIXME - on CC - MIO 39 - 51 */ > - status = "okay"; > - no-1-8-v; > - disable-wp; > - broken-cd; > - xlnx,mio-bank = <1>; > - /* Do not run SD in HS mode from bootloader */ > - sdhci-caps-mask = <0 0x200000>; > - sdhci-caps = <0 0>; > - max-frequency = <19000000>; > -}; > -- > 2.34.1 >
Applied. M -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
