The FVP base model is relying on a DT for Linux operation, so there is
no reason we would need to rely on hardcoded information for U-Boot.
Letting U-Boot use a DT will open up the usage of actual peripherals,
beyond the support for semihosting only.

Enable OF_CONTROL in the Kconfig, and use the latest dts files from
Linux. Depending on whether we use the boot-wrapper or TF-A, there is
already a DTB provided or not, respectively.

To cover the boot-wrapper, we add an arm64 Linux kernel header, which
allows the boot-wrapper to treat U-Boot like a Linux kernel. U-Boot will
find the pointer to the DTB in x0, and will use it.

Even though TF-A carries a DT, at the moment this is not made available
to non-secure world, so to not break users, we use the U-Boot provided
DTB copy in that case. For some reason TF-A puts some DT like structure
at the address x0 is pointing at, but that is very small and doesn't
carry any hardware information. Make the code to ignore those small DTBs.

Signed-off-by: Andre Przywara <[email protected]>
---
 arch/arm/Kconfig                       | 2 ++
 arch/arm/dts/Makefile                  | 1 +
 board/armltd/vexpress64/Kconfig        | 8 ++++++--
 board/armltd/vexpress64/vexpress64.c   | 8 +++++++-
 configs/vexpress_aemv8a_semi_defconfig | 2 +-
 5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 34dbd73cce..afb42e62d8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1241,6 +1241,8 @@ config ARCH_VEXPRESS64
        select DM
        select DM_SERIAL
        select PL01X_SERIAL
+       select OF_CONTROL
+       select CLK
 
 config TARGET_TOTAL_COMPUTE
        bool "Support Total Compute Platform"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 960f1a9fd4..4c8492cd7d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1180,6 +1180,7 @@ dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
 # TODO(Linus Walleij <[email protected]>): Should us a single vexpress
 # Kconfig option to build all of these. See examples above.
 dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS64_BASE_FVP) += fvp-base-revc.dtb
 dtb-$(CONFIG_TARGET_VEXPRESS64_JUNO) += juno-r2.dtb
 
 dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb
diff --git a/board/armltd/vexpress64/Kconfig b/board/armltd/vexpress64/Kconfig
index 55fe0118e1..34126446a7 100644
--- a/board/armltd/vexpress64/Kconfig
+++ b/board/armltd/vexpress64/Kconfig
@@ -15,13 +15,14 @@ choice
 config TARGET_VEXPRESS64_BASE_FVP
        bool "Support Versatile Express ARMv8a FVP BASE model"
        select SEMIHOSTING
+       select LINUX_KERNEL_IMAGE_HEADER
+       select POSITION_INDEPENDENT
+       select OF_BOARD
 
 config TARGET_VEXPRESS64_JUNO
        bool "Support Versatile Express Juno Development Platform"
        select DM_ETH
        select USB
-       select OF_CONTROL
-       select CLK
        select BLK
        imply OF_HAS_PRIOR_STAGE
 
@@ -34,4 +35,7 @@ config JUNO_DTB_PART
          The ARM partition name in the NOR flash memory holding the
          device tree blob to configure U-Boot.
 
+config LNX_KRNL_IMG_TEXT_OFFSET_BASE
+       default SYS_TEXT_BASE
+
 endif
diff --git a/board/armltd/vexpress64/vexpress64.c 
b/board/armltd/vexpress64/vexpress64.c
index 5e22e89824..7d5e5516f9 100644
--- a/board/armltd/vexpress64/vexpress64.c
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -168,11 +168,17 @@ void *board_fdt_blob_setup(int *err)
        }
 #endif
 
-       if (fdt_magic(prior_stage_fdt_address) == FDT_MAGIC) {
+       if (fdt_magic(prior_stage_fdt_address) == FDT_MAGIC &&
+           fdt_totalsize(prior_stage_fdt_address) > 0x100) {
                *err = 0;
                return (void *)prior_stage_fdt_address;
        }
 
+       if (fdt_magic(gd->fdt_blob) == FDT_MAGIC) {
+               *err = 0;
+               return (void *)gd->fdt_blob;
+       }
+
        *err = -ENXIO;
        return NULL;
 }
diff --git a/configs/vexpress_aemv8a_semi_defconfig 
b/configs/vexpress_aemv8a_semi_defconfig
index 24af87904f..cbabc2f96a 100644
--- a/configs/vexpress_aemv8a_semi_defconfig
+++ b/configs/vexpress_aemv8a_semi_defconfig
@@ -9,6 +9,7 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0xff000000
 CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_DEFAULT_DEVICE_TREE="fvp-base-revc"
 CONFIG_IDENT_STRING=" vexpress_aemv8a"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_REMAKE_ELF=y
@@ -45,4 +46,3 @@ CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
-CONFIG_OF_LIBFDT=y
-- 
2.25.1

Reply via email to