From: Andre Przywara <andre.przyw...@arm.com>
As Icenowy pointed out, newer manuals (starting with H6) actually
document the register block at offset 0x800 as "HCI controller and PHY
interface", also describe the bits in our "PMU_UNK1" register.
Let's put proper names to those "unknown" variables and symbols.
While we are at it, generalise the existing code by allowing a bitmap
of bits to clear and set, to cover newer SoCs: The A100 and H616 use a
different bit for the SIDDQ control.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
Signed-off-by: Samuel Holland <sam...@sholland.org>
---
drivers/phy/allwinner/phy-sun4i-usb.c | 32 ++++++++++++---------------
1 file changed, 14 insertions(+), 18 deletions(-)
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c
b/drivers/phy/allwinner/phy-sun4i-usb.c
index 6a965e704d43..73e660edc37d 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -32,7 +32,8 @@
#define REG_PHYTUNE 0x0c
#define REG_PHYCTL_A33 0x10
#define REG_PHY_OTGCTL 0x20
-#define REG_PMU_UNK1 0x10
+
+#define REG_HCI_PHY_CTL 0x10
/* Common Control Bits for Both PHYs */
#define PHY_PLL_BW 0x03
@@ -63,6 +64,7 @@
/* A83T specific control bits for PHY0 */
#define PHY_CTL_VBUSVLDEXT BIT(5)
#define PHY_CTL_SIDDQ BIT(3)
+#define PHY_CTL_H3_SIDDQ BIT(1)
/* A83T specific control bits for PHY2 HSIC */
#define SUNXI_EHCI_HS_FORCE BIT(20)
@@ -87,9 +89,9 @@ struct sun4i_usb_phy_cfg {
int num_phys;
enum sun4i_usb_phy_type type;
u32 disc_thresh;
+ u32 hci_phy_ctl_clear;
u8 phyctl_offset;
bool dedicated_clocks;
- bool enable_pmu_unk1;
bool phy0_dual_route;
int missing_phys;
};
@@ -275,6 +277,12 @@ static int sun4i_usb_phy_init(struct phy *phy)
return ret;
}
+ if (usb_phy->pmu && data->cfg->hci_phy_ctl_clear) {
+ val = readl(usb_phy->pmu + REG_HCI_PHY_CTL);
+ val &= ~data->cfg->hci_phy_ctl_clear;
+ writel(val, usb_phy->pmu + REG_HCI_PHY_CTL);
+ }
+
if (data->cfg->type == sun8i_a83t_phy ||
data->cfg->type == sun50i_h6_phy) {
if (phy->id == 0) {
@@ -284,11 +292,6 @@ static int sun4i_usb_phy_init(struct phy *phy)
writel(val, data->base + data->cfg->phyctl_offset);
}
} else {
- if (usb_phy->pmu && data->cfg->enable_pmu_unk1) {
- val = readl(usb_phy->pmu + REG_PMU_UNK1);
- writel(val & ~2, usb_phy->pmu + REG_PMU_UNK1);
- }
-
if (usb_phy->id == 0)
sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN,
PHY_RES45_CAL_DATA,
@@ -528,7 +531,6 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@@ -537,7 +539,6 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@@ -546,7 +547,6 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@@ -555,7 +555,6 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@@ -564,7 +563,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@@ -573,7 +571,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
@@ -589,7 +586,7 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -599,7 +596,7 @@ static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -609,7 +606,7 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -619,7 +616,7 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -629,7 +626,6 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
.phy0_dual_route = true,
.missing_phys = BIT(1) | BIT(2),
};
--
2.35.1
