Le 18/12/2022 à 11:59, Pali Rohár a écrit :
> On Sunday 18 December 2022 09:29:23 Christophe Leroy wrote:
>>>>>>>> - binman {
>>>>>>>> - filename = "u-boot-with-dtb.bin";
>>>>>>>> - skip-at-start = <CONFIG_SYS_TEXT_BASE>;
>>>>>>>> - sort-by-offset;
>>>>>>>> - pad-byte = <0xff>;
>>>>>>>> - size = <CONFIG_SYS_MONITOR_LEN>;
>>>>>>>> -
>>>>>>>> - u-boot-with-ucode-ptr {
>>>>>>>> - offset = <CONFIG_SYS_TEXT_BASE>;
>>>>>>>> - optional-ucode;
>>>>>>>> - };
>>>>>>>> -
>>>>>>>> - u-boot-dtb-with-ucode {
>>>>>>>> - align = <256>;
>>
>> u-boot.dtsi has 'align = <4>' . Will it still work ?
>
> Yes, it must be <4> otherwise mpc85xx code does not boot. Other boards
> use global u-boot.dtsi so they are already fixed. Just this one board
> has copy of older (not fixed) content of u-boot.dtsi
>
> See commits where it was fixed for other boards:
>
> 7696b80ec5e9 powerpc: mpc85xx: Fix loading U-Boot proper from SD card in SPL
> b898f6a6db76 powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support for NOR booting
> e8c0e0064c8a powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support
>
> In separate thread is discussion about this issue:
> https://lore.kernel.org/u-boot/20221217235913.w7ihsktbplbp2j7z@pali/
Ok
Reviewed-by: Christophe Leroy <[email protected]>
