On Sat, Dec 24, 2022 at 07:37:17PM +0100, Pali Rohár wrote:
> On Sunday 18 December 2022 11:04:11 Christophe Leroy wrote:
> > Le 18/12/2022 à 11:59, Pali Rohár a écrit :
> > > On Sunday 18 December 2022 09:29:23 Christophe Leroy wrote:
> > >>>>>>>> - binman {
> > >>>>>>>> - filename = "u-boot-with-dtb.bin";
> > >>>>>>>> - skip-at-start = <CONFIG_SYS_TEXT_BASE>;
> > >>>>>>>> - sort-by-offset;
> > >>>>>>>> - pad-byte = <0xff>;
> > >>>>>>>> - size = <CONFIG_SYS_MONITOR_LEN>;
> > >>>>>>>> -
> > >>>>>>>> - u-boot-with-ucode-ptr {
> > >>>>>>>> - offset = <CONFIG_SYS_TEXT_BASE>;
> > >>>>>>>> - optional-ucode;
> > >>>>>>>> - };
> > >>>>>>>> -
> > >>>>>>>> - u-boot-dtb-with-ucode {
> > >>>>>>>> - align = <256>;
> > >>
> > >> u-boot.dtsi has 'align = <4>' . Will it still work ?
> > >
> > > Yes, it must be <4> otherwise mpc85xx code does not boot. Other boards
> > > use global u-boot.dtsi so they are already fixed. Just this one board
> > > has copy of older (not fixed) content of u-boot.dtsi
> > >
> > > See commits where it was fixed for other boards:
> > >
> > > 7696b80ec5e9 powerpc: mpc85xx: Fix loading U-Boot proper from SD card in
> > > SPL
> > > b898f6a6db76 powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support for NOR
> > > booting
> > > e8c0e0064c8a powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support
> > >
> > > In separate thread is discussion about this issue:
> > > https://lore.kernel.org/u-boot/20221217235913.w7ihsktbplbp2j7z@pali/
> >
> > Ok
> >
> > Reviewed-by: Christophe Leroy <[email protected]>
>
> Ok, what else is needed for this patch?Well, I had assigned it to Marek, but since it'll be a while before he puts a PR together again, I'll take this at some point to next, or just post v2023.01 release. -- Tom
signature.asc
Description: PGP signature
