On 3/8/23 21:26, Ralph Siemsen wrote:
Allow CONFIG_CLK_RENESAS to be set without bringing in RCAR-GEN2/3 code.
CONFIG_RENESAS is used in drivers/clk/Makefile to control recursion into
the drivers/clk/renesas subdirectory. It also controls compilation of
renesas-cpg-mssr.c support code for the RCAR-GEN2 and RCAR-GEN3 devices.
The support code contains platform specific hardware access (TMU_BASE),
and it is not needed for other Renesas devices such as RZ/N1. Therefore,
alter Makefile to build renesas-cpg-mssr.c only for RCAR-GEN2/3.
Signed-off-by: Ralph Siemsen <ralph.siem...@linaro.org>
Reviewed-by: Sean Anderson <sean...@gmail.com>
---
(no changes since v3)
Changes in v3:
- added tags
drivers/clk/renesas/Kconfig | 2 +-
drivers/clk/renesas/Makefile | 5 ++---
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 1686410d6d..6788415eed 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -1,6 +1,6 @@
config CLK_RENESAS
bool "Renesas clock drivers"
- depends on CLK && ARCH_RMOBILE
+ depends on CLK && (ARCH_RMOBILE || ARCH_RZN1)
help
Enable support for clock present on Renesas RCar SoCs.
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index 8f82a7aa3e..a0d8c10bdb 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -1,6 +1,5 @@
-obj-$(CONFIG_CLK_RENESAS) += renesas-cpg-mssr.o
obj-$(CONFIG_CLK_RCAR_CPG_LIB) += rcar-cpg-lib.o
-obj-$(CONFIG_CLK_RCAR_GEN2) += clk-rcar-gen2.o
+obj-$(CONFIG_CLK_RCAR_GEN2) += clk-rcar-gen2.o renesas-cpg-mssr.o
Why not move the renesas-cpg-mssr.o into obj-$(CONFIG_CLK_RCAR_CPG_LIB)
line instead ? I suspect RZN1 is not using the CPG lib anyway ?