On Fri, 21 Apr 2023 at 06:32, Neha Malcom Francis <[email protected]> wrote: > > Support added for HS and GP boot binaries for J721S2. > > tiboot3.bin, tispl.bin and u-boot.img: For HS-SE devices > tiboot3.bin_fs, tispl.bin and u-boot.img: For HS-FS devices > tiboot3.bin_unsigned, tispl.bin_unsigned, u-boot.img_unsigned: For GP > devices > > It is to be noted that the bootflow followed by J721S2 requires: > > tiboot3.bin: > * R5 SPL > * R5 SPL dtbs > * TIFS > * board-cfg > * pm-cfg > * sec-cfg > * rm-cfg > > tispl.bin: > * DM > * ATF > * OPTEE > * A72 SPL > * A72 SPL dtbs > > u-boot.img: > * A72 U-Boot > * A72 U-Boot dtbs > > Signed-off-by: Neha Malcom Francis <[email protected]> > --- > arch/arm/dts/k3-j721s2-binman.dtsi | 613 ++++++++++++++++++ > .../k3-j721s2-common-proc-board-u-boot.dtsi | 2 + > .../dts/k3-j721s2-r5-common-proc-board.dts | 1 + > board/ti/j721s2/Kconfig | 2 + > 4 files changed, 618 insertions(+) > create mode 100644 arch/arm/dts/k3-j721s2-binman.dtsi
Reviewed-by: Simon Glass <[email protected]> Again a reduction in duplication would be good
