Hi Neha, On Fri, 21 Apr 2023 at 06:32, Neha Malcom Francis <[email protected]> wrote: > > Support added for HS and GP boot binaries for AM65x. > > tiboot3.bin, sysfw.itb, tispl.bin and u-boot.img: For HS devices > tiboot3.bin_unsigned, sysfw.itb, tispl.bin_unsigned, > u-boot.img_unsigned: For GP devices > > Note that the bootflow followed by AM65x requires: > > tiboot3.bin: > * R5 SPL > * R5 SPL dtbs > sysfw.itb: > * sysfw > * board-cfg > * pm-cfg > * sec-cfg > * rm-cfg > > tispl.bin: > * ATF > * OPTEE > * A53 SPL > * A53 SPL dtbs > > u-boot.img: > * A53 U-Boot > * A53 U-Boot dtbs > > Signed-off-by: Neha Malcom Francis <[email protected]> > --- > arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 1 + > .../dts/k3-am654-r5-base-board-u-boot.dtsi | 1 + > arch/arm/dts/k3-am65x-binman.dtsi | 551 ++++++++++++++++++ > board/ti/am65x/Kconfig | 2 + > 4 files changed, 555 insertions(+) > create mode 100644 arch/arm/dts/k3-am65x-binman.dtsi
Reviewed-by: Simon Glass <[email protected]> Is there any way that these boards could share a .dtsi with just the different bits in each board's dtsi? There seems to be a lot of duplicate. Regards, Simon
