Hai all .
I am very new to U-boot and trying to port u-boot onto MPC885 platform. I have done necessary changes in uboot and burned the Uboot binary in NOR based FLASH. The code is executing from FLASH and am able to see console messages. And no messages are seen after the following U-Boot 1.1.6 (Feb 2 2011 - 18:01:58) CPU: MPC885ZPnn at 50 MHz: 8 kB I-Cache 8 kB D-Cache FEC present Board: MPC885ADS DRAM: (8 MB SDRAM) 8 MB BEFORE RELOCATE Can any one let me know, why this is happening and where might the problem be. Thanks. Ammu.
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
