Dear Lakshmi T, In message <002b01cbc370$fc2e0920$f48a1b60$@com> you wrote: > > I am very new to U-boot and trying to port u-boot onto MPC885 platform. > > I have done necessary changes in uboot and burned the Uboot binary in NOR > based FLASH. > > The code is executing from FLASH and am able to see console messages. > > And no messages are seen after the following > > > > U-Boot 1.1.6 (Feb 2 2011 - 18:01:58) > > > > CPU: MPC885ZPnn at 50 MHz: 8 kB I-Cache 8 kB D-Cache FEC present > > Board: MPC885ADS > > DRAM: (8 MB SDRAM) 8 MB > > BEFORE RELOCATE
Can you please stop adding all these bogus empy lines? Thanks. Re your problem: Please see the FAQ at http://www.denx.de/wiki/view/DULG/UBootCrashAfterRelocation Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] "Plan to throw one away. You will anyway." - Fred Brooks, "The Mythical Man Month" _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
