From: Peng Fan <[email protected]> The return value is int type, not sc_err_t(u8), correct the usage.
Signed-off-by: Peng Fan <[email protected]> --- board/toradex/colibri-imx8x/colibri-imx8x.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/board/toradex/colibri-imx8x/colibri-imx8x.c b/board/toradex/colibri-imx8x/colibri-imx8x.c index 52fc7a391bb..29efd8c6a53 100644 --- a/board/toradex/colibri-imx8x/colibri-imx8x.c +++ b/board/toradex/colibri-imx8x/colibri-imx8x.c @@ -43,9 +43,9 @@ static void setup_iomux_uart(void) static int is_imx8dx(void) { u32 val = 0; - sc_err_t sc_err = sc_misc_otp_fuse_read(-1, 6, &val); + int sc_err = sc_misc_otp_fuse_read(-1, 6, &val); - if (sc_err == SC_ERR_NONE) { + if (sc_err) { /* DX has two A35 cores disabled */ return (val & 0xf) != 0x0; } @@ -70,7 +70,7 @@ void board_mem_get_layout(u64 *phys_sdram_1_start, int board_early_init_f(void) { sc_pm_clock_rate_t rate; - sc_err_t err = 0; + int err; /* * This works around that having only UART3 up the baudrate is 1.2M @@ -78,13 +78,13 @@ int board_early_init_f(void) */ rate = 80000000; err = sc_pm_set_clock_rate(-1, SC_R_UART_0, SC_PM_CLK_PER, &rate); - if (err != SC_ERR_NONE) + if (err) return 0; /* Set UART3 clock root to 80 MHz and enable it */ rate = SC_80MHZ; err = sc_pm_setup_uart(SC_R_UART_3, rate); - if (err != SC_ERR_NONE) + if (err) return 0; setup_iomux_uart(); -- 2.40.0
