From: Peng Fan <[email protected]> The return value is int type, not sc_err_t(u8), correct the usage.
Signed-off-by: Peng Fan <[email protected]> Tested-by: Oliver Graute <[email protected]> Reviewed-by: Oliver Graute <[email protected]> --- board/congatec/cgtqmx8/cgtqmx8.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/board/congatec/cgtqmx8/cgtqmx8.c b/board/congatec/cgtqmx8/cgtqmx8.c index bedd1e03308..26189ff66f5 100644 --- a/board/congatec/cgtqmx8/cgtqmx8.c +++ b/board/congatec/cgtqmx8/cgtqmx8.c @@ -79,7 +79,7 @@ static void setup_iomux_uart(void) int board_early_init_f(void) { /* sc_ipc_t ipcHndl = 0; */ - sc_err_t scierr = 0; + int scierr; /* When start u-boot in XEN VM, directly return */ /* if (IS_ENABLED(CONFIG_XEN)) */ @@ -89,19 +89,19 @@ int board_early_init_f(void) /* Power up UART0, this is very early while power domain is not working */ scierr = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON); - if (scierr != SC_ERR_NONE) + if (scierr) return 0; /* Set UART0 clock root to 80 MHz */ sc_pm_clock_rate_t rate = 80000000; scierr = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate); - if (scierr != SC_ERR_NONE) + if (scierr) return 0; /* Enable UART0 clock root */ scierr = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false); - if (scierr != SC_ERR_NONE) + if (scierr) return 0; setup_iomux_uart(); -- 2.40.0
