This is my first contribution to U-Boot and my first attempt at an email-patch submission workflow. So please go easy on me!
This series of patches adds the basics required to get the PINE64 PineTab2 booting with U-Boot. This has only been tested thus far with eMMC and SD card booting, but I intend to do further work to get the display and USB tested and working in the future too. Some minor modifications were required to the mmc tree due to a bug in the implementation of the Designware MMC controller where pulling PWREN high causes it not to work. David Hewitt (2): rockchip: Add initial support for the PineTab2 from PINE64 mmc: Add quirk to disable PWREN for dw_mmc arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3566-pinetab2.dts | 422 ++++++++++++++++++ arch/arm/mach-rockchip/rk3568/Kconfig | 9 + board/pine64/pinetab2-rk3566/Kconfig | 15 + board/pine64/pinetab2-rk3566/MAINTAINERS | 7 + board/pine64/pinetab2-rk3566/Makefile | 5 + .../pine64/pinetab2-rk3566/pinetab2-rk3566.c | 1 + configs/pinetab2_defconfig | 83 ++++ drivers/mmc/dw_mmc.c | 3 +- drivers/mmc/rockchip_dw_mmc.c | 3 + include/configs/pinetab2-rk3566.h | 13 + include/configs/rk3568_common.h | 4 +- include/dwmmc.h | 1 + 13 files changed, 564 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/rk3566-pinetab2.dts create mode 100644 board/pine64/pinetab2-rk3566/Kconfig create mode 100644 board/pine64/pinetab2-rk3566/MAINTAINERS create mode 100644 board/pine64/pinetab2-rk3566/Makefile create mode 100644 board/pine64/pinetab2-rk3566/pinetab2-rk3566.c create mode 100644 configs/pinetab2_defconfig create mode 100644 include/configs/pinetab2-rk3566.h Signed-off-by: David Hewitt <[email protected]> Cc: Simon Glass <[email protected]> Cc: Philipp Tomsich <[email protected]> Cc: Kever Yang <[email protected]> Cc: Peng Fan <[email protected]> Cc: Jaehoon Chung <[email protected]> -- 2.34.1
