Hi Simon, On Mon, Jun 19, 2023 at 8:02 PM Simon Glass <[email protected]> wrote: > > Enable the various options needed for display to work on the qemu-x86_64 > board. This includes expanding the available malloc() memory in SPL, > since the PCI bus must be enumerated in order to find the video device. > > It also includes enabling a bloblist, so that the video parameters can be > passed. This is placed at address 10000 but is not needed after U-Boot > proper reads the information there. > > Signed-off-by: Simon Glass <[email protected]> > --- > > (no changes since v1) > > configs/qemu-x86_64_defconfig | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig > index f29a5aa0f813..371ca9de8429 100644 > --- a/configs/qemu-x86_64_defconfig > +++ b/configs/qemu-x86_64_defconfig > @@ -7,6 +7,7 @@ CONFIG_MAX_CPUS=2 > CONFIG_SPL_DM_SPI=y > CONFIG_DEFAULT_DEVICE_TREE="qemu-x86_i440fx" > CONFIG_SPL_TEXT_BASE=0xfffd0000 > +CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 > CONFIG_DEBUG_UART_BASE=0x3f8 > CONFIG_DEBUG_UART_CLOCK=1843200 > CONFIG_X86_RUN_64BIT=y > @@ -29,7 +30,10 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y > CONFIG_DISPLAY_BOARDINFO_LATE=y > CONFIG_LAST_STAGE_INIT=y > CONFIG_PCI_INIT_R=y > +CONFIG_BLOBLIST=y > +CONFIG_BLOBLIST_ADDR=0x10000 > CONFIG_SPL_NO_BSS_LIMIT=y > +CONFIG_SPL_BOARD_INIT=y
Use this option to control not initializing serial in SPL is not appropriate. See comments in patch #26 > CONFIG_SPL_SYS_MALLOC_SIMPLE=y > CONFIG_SPL_CPU=y > CONFIG_SPL_ENV_SUPPORT=y > @@ -69,10 +73,12 @@ CONFIG_LBA48=y > CONFIG_SYS_64BIT_LBA=y > CONFIG_CPU=y > CONFIG_NVME_PCI=y > +CONFIG_SPL_PCI_PNP=y > CONFIG_SPL_DM_RTC=y > CONFIG_SYS_NS16550_PORT_MAPPED=y > CONFIG_SPI=y > CONFIG_USB_KEYBOARD=y > +CONFIG_SPL_VIDEO=y > CONFIG_FRAMEBUFFER_SET_VESA_MODE=y > CONFIG_FRAMEBUFFER_VESA_MODE_USER=y > CONFIG_FRAMEBUFFER_VESA_MODE=0x144 > -- Otherwise, Reviewed-by: Bin Meng <[email protected]> Regards, Bin
