Hi Marek On 1/13/24 18:57, Marek Vasut wrote: > In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are enabled, the console > stdin, stdout, stderr must be defined in environment. Define the default > settings to fix the following warning on boot: > > " > In: No input devices available! > Out: No output devices available! > Err: No error devices available! > " > > Sort the default environment as well. > > Signed-off-by: Marek Vasut <[email protected]> > --- > Cc: Patrice Chotard <[email protected]> > Cc: Patrick Delaunay <[email protected]> > Cc: [email protected] > Cc: [email protected] > --- > include/configs/stm32mp15_dh_dhsom.h | 11 +++++++---- > 1 file changed, 7 insertions(+), 4 deletions(-) > > diff --git a/include/configs/stm32mp15_dh_dhsom.h > b/include/configs/stm32mp15_dh_dhsom.h > index 8ff882264f4..de39b19219d 100644 > --- a/include/configs/stm32mp15_dh_dhsom.h > +++ b/include/configs/stm32mp15_dh_dhsom.h > @@ -12,14 +12,13 @@ > #define PHY_ANEG_TIMEOUT 20000 > > #ifdef CONFIG_SPL_BUILD > -#define CFG_EXTRA_ENV_SETTINGS \ > +#define CFG_EXTRA_ENV_SETTINGS > \ > "dfu_alt_info_ram=u-boot.itb ram " \ > __stringify(CONFIG_SPL_LOAD_FIT_ADDRESS) \ > " 0x800000\0" > #endif > > -#define STM32MP_BOARD_EXTRA_ENV \ > - "usb_pgood_delay=1000\0" \ > +#define STM32MP_BOARD_EXTRA_ENV > \ > "dh_update_sd_to_emmc=" /* Install U-Boot from SD to eMMC */ \ > "setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \ > "load mmc 0:4 ${loadaddr1} boot/u-boot-spl.stm32 && " \ > @@ -49,7 +48,11 @@ > "sf update ${loadaddr1} 0x40000 ${filesize1} && " \ > "sf update ${loadaddr} 0x80000 ${filesize} && " \ > "env set filesize1 && env set loadaddr1\0" \ > - "update_sf=run dh_update_sd_to_sf\0" > + "stdin=serial\0" \ > + "stdout=serial\0" \ > + "stderr=serial\0" \ > + "update_sf=run dh_update_sd_to_sf\0" \ > + "usb_pgood_delay=1000\0" > > > #include <configs/stm32mp15_common.h>
Reviewed-by: Patrice Chotard <[email protected]> Thanks Patrice
