On 1/16/24 08:19, Patrice CHOTARD wrote:
> Hi Marek
> 
> On 1/13/24 18:57, Marek Vasut wrote:
>> In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are enabled, the console
>> stdin, stdout, stderr must be defined in environment. Define the default
>> settings to fix the following warning on boot:
>>
>> "
>> In:    No input devices available!
>> Out:   No output devices available!
>> Err:   No error devices available!
>> "
>>
>> Sort the default environment as well.
>>
>> Signed-off-by: Marek Vasut <[email protected]>
>> ---
>> Cc: Patrice Chotard <[email protected]>
>> Cc: Patrick Delaunay <[email protected]>
>> Cc: [email protected]
>> Cc: [email protected]
>> ---
>>  include/configs/stm32mp15_dh_dhsom.h | 11 +++++++----
>>  1 file changed, 7 insertions(+), 4 deletions(-)
>>
>> diff --git a/include/configs/stm32mp15_dh_dhsom.h 
>> b/include/configs/stm32mp15_dh_dhsom.h
>> index 8ff882264f4..de39b19219d 100644
>> --- a/include/configs/stm32mp15_dh_dhsom.h
>> +++ b/include/configs/stm32mp15_dh_dhsom.h
>> @@ -12,14 +12,13 @@
>>  #define PHY_ANEG_TIMEOUT            20000
>>  
>>  #ifdef CONFIG_SPL_BUILD
>> -#define CFG_EXTRA_ENV_SETTINGS                                      \
>> +#define CFG_EXTRA_ENV_SETTINGS                                              
>> \
>>      "dfu_alt_info_ram=u-boot.itb ram "                              \
>>                      __stringify(CONFIG_SPL_LOAD_FIT_ADDRESS)        \
>>                      " 0x800000\0"
>>  #endif
>>  
>> -#define STM32MP_BOARD_EXTRA_ENV \
>> -    "usb_pgood_delay=1000\0" \
>> +#define STM32MP_BOARD_EXTRA_ENV                                             
>> \
>>      "dh_update_sd_to_emmc=" /* Install U-Boot from SD to eMMC */    \
>>              "setexpr loadaddr1 ${loadaddr} + 0x1000000 && "         \
>>              "load mmc 0:4 ${loadaddr1} boot/u-boot-spl.stm32 && "   \
>> @@ -49,7 +48,11 @@
>>              "sf update ${loadaddr1} 0x40000 ${filesize1} && "       \
>>              "sf update ${loadaddr} 0x80000 ${filesize} && "         \
>>              "env set filesize1 && env set loadaddr1\0"              \
>> -    "update_sf=run dh_update_sd_to_sf\0"
>> +    "stdin=serial\0"                                                \
>> +    "stdout=serial\0"                                               \
>> +    "stderr=serial\0"                                               \
>> +    "update_sf=run dh_update_sd_to_sf\0"                            \
>> +    "usb_pgood_delay=1000\0"
>>  
>>  
>>  #include <configs/stm32mp15_common.h>
> 
> Reviewed-by: Patrice Chotard <[email protected]>
> 
> Thanks
> Patrice

Applied to u-boot-stm32/master

Thanks
Patrice

Reply via email to