Rockchip RK3399 and RK3588 SoCs can support wide range of bootflows. Without full bootflow commands, it can be difficult to figure out issues if any, hence enable by default.
Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Shantur Rathore <[email protected]> --- Changes in v5: - Only enable it for RK3399 and RK3588 as suggested by Kever Changes in v4: - Replace BOOTSTD_DEFAULT with BOOTSTD_FULL as previous version didn't apply on next arch/arm/mach-rockchip/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 6ff0aa6911..5a46c986ef 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -265,6 +265,7 @@ config ROCKCHIP_RK3399 imply TPL_TINY_MEMSET imply TPL_ROCKCHIP_COMMON_BOARD imply SYS_BOOTCOUNT_SINGLEWORD if BOOTCOUNT_LIMIT + imply BOOTSTD_FULL imply CMD_BOOTCOUNT if BOOTCOUNT_LIMIT help The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72 @@ -319,6 +320,7 @@ config ROCKCHIP_RK3588 imply MISC_INIT_R imply CLK_SCMI imply SCMI_FIRMWARE + imply BOOTSTD_FULL help The Rockchip RK3588 is a ARM-based SoC with quad-core Cortex-A76 and quad-core Cortex-A55 including NEON and GPU, 6TOPS NPU, Mali-G610 MP4, -- 2.40.1
